International Arcade Museum Library

***** DEVELOPMENT & TESTING SITE (development) *****

Star Tech Journal

Issue: 1986-October - Vol 8 Issue 8 - Page 3

PDF File Only

October 1986 [3)
STAR*TECH Journal
C: Lubricate the accelerator cable with a
spray graphite lubricant. This is
available at all hardware stores -as is
the hardware needed in A & B above. To
lubricate, renove the two M-5 tamper
screws holding the accelerator handle on
the handle bars. This will allow access to
the end of the cable. Allow the lubricant
to flow down the cable tube. Do not use
oil as it will gum up.
Bally Midway MOTORDOME
Cheap Squeak
By Ed Schmidt/ Asst. Field Service Mgr.
Bally Midway Mfg. Co.
Franklin Park, IL
SUBJECT: Pinball 'l\lrbo Cheap Squeak
A084-91855-COOO.
RE: MO'IORIXJME operating manual form #OE14-
00300-0100, Page 2-7 Sheet 2 of 3.
'!be :i;x>lari ty of Cl6 is incorrectly shown
on the schematic. Please correct per
drawing below:
Merit BULL BUSTER Test Precaution
By Jim Kelly/Service Manager
Merit Industries
Bensalem, Pennsylvania
NOI'E:
'!he capacitor was stuffed into the
P.C. board properly with the "+"
(:i;x>sitive lead) facing Cl7.
'M'len replacing Cl6, please install per
drawing below:
-
C17
c:::J
r
+ C1"
o-{C}-
Ij n
He.41" JtA/1( z_
Game
SN#l453-1495
Problem: Front nounted test switch (lower
left-hand comer of DRT-150
display board) when activated
cap damage CPU board.
cause: Test switch incorrectly installed.
CORROCTIVE ACTION:
Step 1. cut the two traces on the solder
side of the main display board (DRT-150) -
connecting the test switch to the 12 volt
bus line.
Step 2. On the solder side of the main
display board, solder junper wire(~
25-30) from one leg of the test switch to
the ground bus at Ul2 (a 7447 IC) Pin #8.
YIDIO «:OIIICTIOI
RE: KmJRIXJ,1E operating nanual form #OE14-
00300-0100, Page 2-4, T.c.s. for
pinball assembly drawing.
The "+" symbol screened above the Cl6, luF
capacitor is in error.
Dart
Re: BULL BUSTER
930 Jeffrey Lane
Dixon, California 95620
i
(916) 678-5189
....................................... .
...
INTERNATIONAL
IMPORTERS & LIQUIDATORS
MANUFACTURERS & DISTRIBUTORS
OF BOXED COSTUME JEWELRY
Ideal For
Cranes & Redemption
Equipment
"Ask for Larry"
(305) 920-6322/44
2854-L Stirling Rd.
Hollywood, FL 33020

Future scanning projects are planned by the International Arcade Museum Library (IAML).