International Arcade Museum Library

***** DEVELOPMENT & TESTING SITE (development) *****

Star Tech Journal

Issue: 1995-December - Vol 17 Issue 10 - Page 6

PDF File Only

STAR*TEcH
.
Journal
December 1995
CD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. ........... .
RoWECBA-2
Monitor
BILL ACCEPTOR PROBLEMS
Proble1111s?
Order This Tech Pub
J\flONITORS:
SYMPTOMS/SOLUTIONS
Bob Hade
TBI Games
Loves Park, Illinois
PROBLEM
Includes all S* TJ
monitor articles from
1 990, 1 991 , 1 992,
1993, 1994 & 1995
0 1990
0 1991
O 1992
0 1993
0 1994
0 1995
$14.95
$14 .95
$14.95
$14.95
$14 .95
$14.95
Save over 30% order the
0 Entire set for $59. 95
Name: - - - - - - - - - - - =
Company _ _ _ _ _ _ _ _ _
I
Address - - - - - - - - - - - - . 1 1 I
t
I
City _ _ _ _ _ _ _ _ _ _ l
I
I
I
I
Order o Prepaid or o COD I
{Please add $3 s/h. Thank you!) I
I
STAR*TECH Journal I
Post Office Box 35 I
State/Zip
LM_:~f~~:._~,:_?~<:,_5~J
CBA-2's, I'm sure, have been giv-
ing alot of other people problems
-I would guess. It seems that ev-
ery one develops some type of
problem over a period of time.
And the problems are not any-
thing the CBA has to do, in some
part, to the Rowe Link.
OLDVsNEw
If I were to compare the num-
bers of problems with this Bill
Acceptor to the numbers of
boxes that have them, the old
OBA comes out looking very
good. Its discouraging to see this
many problems and really, I have
not gotten that much support
from Rowe. We've sent back 5
under warranty and there is a
very large percentage of jukes
with this type of bill acceptor.
CAUSES
Kerry Messana, Service Technician
Minetto, New York
The CBA is a nice acceptor when
it works. One problem with it is
there were so many variations of
the unit. The later ones used in
CDlO0C's on up is OK until it
gets dirty. It has a habit of col-
lecting alot of dust and dirt
around the optos.
CAUTION
The one optic board that is
mounted off ears from the lower
track is usually the filthiest. Be
extremely careful and gentle when
removing this board, those
mounting ears break off quite
easily. I have had to replace alot
of lower tracks because of cus-
tomers breaking them.
CRACK.ED SHAFr
Another problem is in one of the
top shafts, it is the one that is on
top with the timing belt around
it, they have a habit of cracking.
When this happens, the pulley
slips on the shaft and the belts
won't tum or tum very slowly. If
the pulleys on that shaft are clear
plastic, replace that shaft if it is
in for service. The newer ones are
made of white plastic and hold
up better.
INTEGRATED CIRCUIT
Another problem with the accep-
tor is on the mag head board as-
sembly, I have had a few go bad,
the LM358 surface mount IC
begins to oscillate, especially af-
ter it has been on a few minutes.
Evidence of this can be seen on
an oscilloscope at the connector
on the lower board.
LUBE
Also, don't forget to lubricate the
acceptor according to specs in the
... continued on page 7.

Future scanning projects are planned by the International Arcade Museum Library (IAML).