Star Tech Journal

August 1995
CID
STAR*TECH
Journal
ATARI Moro FRENZ¥ DELUXE
EXCESSIVE WEAR MODIFICATION
Al Vernon
Atari Games/Time Warner
Milpitas, California
SUBJECT
This modification fixes the pal-
let roller's excessive wear and
noise problem.
INSTALLING THE NEW
MolNFo
This Moto Frenzy kit is available
from your Atari Games/Time
Warner Interactive Distributor.
Please call (408)434-3950 if you
have any questions. Thank You.
Moro FRENZYPUU£Y.
PARTS LIST
1 Pulley
1 Small washer
1 Bolt
2 Large washer
1 Belt
053486-012
175013-10201
72-5516
175002-007
178200-001
1. Remove the rear metal floor J!
coveL
.
2. Lift the bike assembly and J
rop-up the beam on a 4x4 block.
3. Remove rolling pin flange
bearing, (inspect flange bearing
-replace if worn).
4. Remove the old belt, replace
with the new one and re-as-
semble the rolling pin. Make sure
the rolling pin is straight and that
the set screws on the rolling pin
shaft are tight.
Retro-fit Kit
Installing the new smaller pulley.
5. Remove the Motor assembly
from the game and place on your
bench, using a 27mm or 1-1/16" i!
socket unscrew the pulley nut. 'i
Pry the pulley off with a large ;l
screw driver.
6. Install the New Smaller Pulley
on to the motor shaft (as shown
in pictures) and re-assemble the
otor inside the game cabinet.
L1.fter reinstalling the motor,
check that the belt is straight and
adjust the belt tension.
New pulley installed on Motor.