Star Tech Journal

Arachnid Coin Credit Card PCB
Connie Reece
Arachnid, Inc.
Rockford, Illinois
Illustrated below are the most recent updates for
all our new games with coin credit PC board addition.
Some general guidelines to follow when setting up your new games with coin accumulation:
1. After assembly and installation into its
permanent location, toggle all dip switches
3. Check the coin credit board for the revi-
sions shown below. If they haven't all been
back and forth to be sure that they are
making good contact. There are 3 sets of dip
switches on the coin credit board (shown
below) and also one set on the main PC board
on 6000 and 7000 models. If any of these
switches are not making proper contact they
could cause missed coin-ups. It is a good
idea to repeat this exercise any time a game
is relocated.
made, please do them. These revisions
should eliminate coin-in problems, an
minimize any static lock-up problems you·
may be experiencing.
Coln Credit Card, Solder Side
2. (6200 series only) Check your Eprom
version... the Eprom on the main board
(U15) has a white label on it; it should say:
Componeat LocatloDS
15551
~~ l:J
I D
1
l
wtaDJumpe,
aa4er this J.C.
If your revision number is lower than V3.4,
contact your distributor for a replacement.
l i e • - tlllo /2N4400
tnuaautOt'
10
~I
~ -4-01-3
j
4520
4093
...... - ~
B
B
0
O'
-f)
CJ2N:(4~
M4 . lmf eapeC11l4
totllla-tloa
If there any questions regarding these procedures, contact Arachnid Engineering Dept at 1-800/435-8319.