Star Tech Journal
Issue: 1995-September - Vol 17 Issue 7 - Page 4
STAR*TEcH
Journal
September 1995
CD
WILLIAMS
LAZER-TRON
Your Source For:
DRACULA
PoGGER
v' Monthly Tech Journals
v' Service Manuals
v' Video Pattern
Generator
v' STJ on CD-ROM
v' Indexing, Database and
Tracking Software
v' Coin-Op Mail List Rental
v' Industry Bulletin Board
v' Back Issues from 1979
BALL LOADING
TURNTABLE
PROBLEM
BURNOUT
STAR*TECH Journal
Order Prepaid or COO.
609 I 654-5544
Fax:
609/654-1441
Bbs:
610/251-9387
Email: startech@cyberenet.net
Phone:
SF"' on
CD-ROM
Every tech tip, game mod, test
procedure, Mfg change, update,
upgrade, precaution, etc.
for virtually all coin-op games
produced from
John Liikala
Canadian Amusements
Burnaby, BC Canada
Victoria A. Krenz,
Manufacturing Engineering Mgr.
Lazer-Tron Corp.
Pleasanton, California
PROBLEM
Long range opto error during
game play. (Note: Not during ser-
vice tests).
GAME
Four and Single Player Pogger.
PROBLEM
SYMPTOM
When the pinball is turned on, it
will cause auto loading of the
trapped ball on the lower right
hand trap where the ball gets
dragged across the play field.
This will happen when the game
is started every time.
CAUSE/ SoumoN
When ball is loaded into right
hand side trough, the ball will rest
on the metal bracket and will not
break the infrared beam being
transmitted by the transmitter
diode. Therefore, take the
bracket and reform it up so that
the ball is breaking the IR beam.
1979 - 1995
Some of our customers have ex-
perienced excessive wear on the
turntable belt and/ or a burned
out turntable motor.
CAUSE
We believe this is due to high
pressure applied to the turntable
by the tension wheel. The tension
wheel assembly is located along
the edge of the turntable. It has a
spring attached at one end and a
roller wheel on the other.
SoLUTION/PRocEDURE
With the belt removed and by
hand, you should be able to turn
the table freely. If not, you must
move the eyebolt anchoring the
spring until the table spins freely.
Every page (over 5,000!) of
STAR* TECH Journal
Now available on Disc!
CD-ROM technology:
Economical, Fast and Efficient!
Best Information Retrieval Available!
See Back Cover For Details
T AITO REFOCUSES EFFORTS ON COIN-OP
Taito America Corp, a subsidiary of the
world's largest manufacturer and opera-
tor of coin-operated arcade games and
a major player in the home video game
software arena, is repositioning its ef-
forts in America.
Rather than develop consumer game
software for the many hardware formats
competing in today's marketplace, th
company is focusing its business plan
on the booming arcade and family fun
center establishments.
Journal
September 1995
CD
WILLIAMS
LAZER-TRON
Your Source For:
DRACULA
PoGGER
v' Monthly Tech Journals
v' Service Manuals
v' Video Pattern
Generator
v' STJ on CD-ROM
v' Indexing, Database and
Tracking Software
v' Coin-Op Mail List Rental
v' Industry Bulletin Board
v' Back Issues from 1979
BALL LOADING
TURNTABLE
PROBLEM
BURNOUT
STAR*TECH Journal
Order Prepaid or COO.
609 I 654-5544
Fax:
609/654-1441
Bbs:
610/251-9387
Email: startech@cyberenet.net
Phone:
SF"' on
CD-ROM
Every tech tip, game mod, test
procedure, Mfg change, update,
upgrade, precaution, etc.
for virtually all coin-op games
produced from
John Liikala
Canadian Amusements
Burnaby, BC Canada
Victoria A. Krenz,
Manufacturing Engineering Mgr.
Lazer-Tron Corp.
Pleasanton, California
PROBLEM
Long range opto error during
game play. (Note: Not during ser-
vice tests).
GAME
Four and Single Player Pogger.
PROBLEM
SYMPTOM
When the pinball is turned on, it
will cause auto loading of the
trapped ball on the lower right
hand trap where the ball gets
dragged across the play field.
This will happen when the game
is started every time.
CAUSE/ SoumoN
When ball is loaded into right
hand side trough, the ball will rest
on the metal bracket and will not
break the infrared beam being
transmitted by the transmitter
diode. Therefore, take the
bracket and reform it up so that
the ball is breaking the IR beam.
1979 - 1995
Some of our customers have ex-
perienced excessive wear on the
turntable belt and/ or a burned
out turntable motor.
CAUSE
We believe this is due to high
pressure applied to the turntable
by the tension wheel. The tension
wheel assembly is located along
the edge of the turntable. It has a
spring attached at one end and a
roller wheel on the other.
SoLUTION/PRocEDURE
With the belt removed and by
hand, you should be able to turn
the table freely. If not, you must
move the eyebolt anchoring the
spring until the table spins freely.
Every page (over 5,000!) of
STAR* TECH Journal
Now available on Disc!
CD-ROM technology:
Economical, Fast and Efficient!
Best Information Retrieval Available!
See Back Cover For Details
T AITO REFOCUSES EFFORTS ON COIN-OP
Taito America Corp, a subsidiary of the
world's largest manufacturer and opera-
tor of coin-operated arcade games and
a major player in the home video game
software arena, is repositioning its ef-
forts in America.
Rather than develop consumer game
software for the many hardware formats
competing in today's marketplace, th
company is focusing its business plan
on the booming arcade and family fun
center establishments.
Future scanning projects are planned by the International Arcade Museum Library (IAML).