Star Tech Journal

December 1995
CID
PARTS
Wire Form 1-1/4" Rail
Part =#=535-7570-00
C.P.U. EPROM
Part =#=965-0202-00-v3.02
STAR*TEcH
the right outlane. Place a small
mark there.
2) Using fig. 2 for reference mea-
sure 1-1/4" down from your first
mark in step one. Place a small
mark there.
INSTALLATION PROCEDURE
1) Using fig. 1 for reference mea-
sure 1/ 4" from the top post of the
wireform ball guide that sepa-
rates the right return lane from
3) Using a 3/32" drill bit or equal,
drill a 3/8" deep hole at each of
your marks. Drill your holes on
Journal
the inside of the existing
wire form rail ( the return lane
side) right along side of it. Clean
your marks and any wood dust
from the playfield using a soft
cloth.
4) Push the wireform into the
holes and if necessary use a small
block of wood and a hammer to
tap it down.
FIGURE 1
5tep1 Note:
Top of Post of Wire Form Ball Guide
5tep1 Note:
Measure .25" down and mark
5tep2Note:
Measure 1.25" down from 1st mark & mark
Add new 1.25" Wire Form behind
existing Right Return/Right
Outlane Wire Form Ball Guide
Right Side
Playfield Wood
-+ - Fr-o-nt_ o
_f_C_a_b-in-et--,I
,---1
1.25"+
FIGURE2