Star Tech Journal

WMS Funhouse
Installation Instructions
Trap Door Hinge
01-10223 Trap Door Stop Bracket
A-13962 Trap Door Assembly
1
From underside of playfield, remove chute as-
sembly (A-13966).
Parts and Service Dept.
Williams Games
Chicago, Illinois
STEP
SUBJECT
STEP 2
Trap Door Stop Bracket (01-10223) should be
centrally installed in Trap Door Operning, (using
#6 sheet metal screw), and have its inside comer
aligned with the lower playfield corner.
Funhouse Trap Door Hinge
In order to eliminate stress on the A-14155
Funhouse trap door hinge assembly the follow-
ing procedure is recommended.
STEP
3
If the A-13961 trap door mechanism assembly is
If existing Trap Door assembly is damaged,
moved forward (towards the player) in the
amount of .150", the incidence of trap door hinge
breakage will be greatly reduced, if not elimi-
nated. However, in order to accomplish this, the
A-13966 chute assembly must first be removed
and a like amount of material removed from the
open end of the chute which is in front of the
mechanism.
remove and replace.
These actions combined with the replacement of
the A-14155 hinge assembly should resolve this
condition.
Under Side of Playfield,
Viewed in Raised Position
STEPl
A-_13966
Chute Asscmbl:r_
4
Reinstall Chute assembly.
STEP