Star Tech Journal
Issue: 1990-September - Vol 12 Issue 7 - Page 10
Dynam.o's Response to Air Hockey
Coin Mech Problem.
Mark Robbins
Dynamo Corporation
Richland Hills, Texas
SUBJECT
The problem which Bob Hade ofIBI Games had
with his Air Hockey push chute coin mech (see
S,n'J June '90) is one in which we are familiar
with and is relatively simple to solve.
DESIGN
The design of the coin switch bracket is ifltended
to provide extra additional anti-cheat protec-
tion.
to look through the two holes near the access
door, just open the coin door and eyeball it.
A slight adjustment of the extension up or down
is all that is usually necessary. Another alterna-
tive is to bend the metal guide bracket up and out
of the way. This reduces its potential anti-cheat
capability, but a number of operators have done
this with no problem whatsoever.
Toe coin mech extension,
when it trips the switch,
goes between a molded
plastic piece below and a
right-angled metal guide
piece above.
NOTE
Finally, I would like to en- ~
courage all operators to
bring any problems with Air
Hockey to my attention, no
matter how small they
might seem to be. Call me at
Dynamo (800/527-6054)
or
contact
your
distributor's service de-
partment.
This provides protection
against the unlikely possi-
bility that someone could
cheat the machine by
pushing the slide in and
jamming it up and down
hard enough to trip the
switch.
Operators may not always
realize how important they
are in providing feedback to
manufacturers.
CAUSE
Toe possible cause for the
misadjustment was men-
tioned in Bob's previous
article. Toe extension may have gotten bent
inadvertently during collection, by banging the
floor or whatever. (Sometimes things get jarred
during shipping so a new table could have such
a problem.)
SOLUTION
In either case, a slight bending of the extension
up or down will eliminate the problem. No need
There are hundreds of parts
in every machine and the
slightest variation here or
there can cause unforeseen problems. Your in-
put is vitally needed to make the machine, in this
case, Dynamo Air Hockey, as trouble-free as
possible.
0
0
0
Coin Mech Problem.
Mark Robbins
Dynamo Corporation
Richland Hills, Texas
SUBJECT
The problem which Bob Hade ofIBI Games had
with his Air Hockey push chute coin mech (see
S,n'J June '90) is one in which we are familiar
with and is relatively simple to solve.
DESIGN
The design of the coin switch bracket is ifltended
to provide extra additional anti-cheat protec-
tion.
to look through the two holes near the access
door, just open the coin door and eyeball it.
A slight adjustment of the extension up or down
is all that is usually necessary. Another alterna-
tive is to bend the metal guide bracket up and out
of the way. This reduces its potential anti-cheat
capability, but a number of operators have done
this with no problem whatsoever.
Toe coin mech extension,
when it trips the switch,
goes between a molded
plastic piece below and a
right-angled metal guide
piece above.
NOTE
Finally, I would like to en- ~
courage all operators to
bring any problems with Air
Hockey to my attention, no
matter how small they
might seem to be. Call me at
Dynamo (800/527-6054)
or
contact
your
distributor's service de-
partment.
This provides protection
against the unlikely possi-
bility that someone could
cheat the machine by
pushing the slide in and
jamming it up and down
hard enough to trip the
switch.
Operators may not always
realize how important they
are in providing feedback to
manufacturers.
CAUSE
Toe possible cause for the
misadjustment was men-
tioned in Bob's previous
article. Toe extension may have gotten bent
inadvertently during collection, by banging the
floor or whatever. (Sometimes things get jarred
during shipping so a new table could have such
a problem.)
SOLUTION
In either case, a slight bending of the extension
up or down will eliminate the problem. No need
There are hundreds of parts
in every machine and the
slightest variation here or
there can cause unforeseen problems. Your in-
put is vitally needed to make the machine, in this
case, Dynamo Air Hockey, as trouble-free as
possible.
0
0
0
Future scanning projects are planned by the International Arcade Museum Library (IAML).