.. . Step By Step
18. Wire harness to your speaker. Test play.
19. If everything's ok, wire up your coin meter(s) and
coin door lights.
20. If you are using a Suzo inductive joystick, meas-
ure its voltage at its connector and readjust your
power supply as necessaxy.
21. Consider installing new coin door mechs.
22. Dress off your harness wiring with cable ties
throughout the cabinet. Use cable ties with screw
holes at the end to secure the harness properly at the
coin door so it won't get pinched. Secure the harness
at the monitor so it doesn't unplug itself. Secure the
harness in the control panel every couple of inches to
keep the wires from interfering with the controls and
switches.
23. Test play your game. Make any switch adjust-
ments needed in the control panel. Set your player
options on the dip switches to match player difficulty
to your desired average play time.
24. Play a 2-player game and be sure the picture
doesn't flip upside-down if you're in an upright.
25. Everything pe:rfect?Take a break-you earned it!
Drew's • PO Box 632 • Fairforest, SC 29336
803/574-0162 • Fax 803/574-7680 • Telex 510601 2480