Star Tech Journal

18
STAR*TECH JOURNAL/APRIL 1983
ATARI
"POLE POSITION" PULLEY CABLE
Rewinding the pulley cable
1. Place foot-pedal control assembly
upside down on work surface with pedal
in fully-open position and hinged end
away from you.
2. Rotate pulley until cap screw points
straight up.
CAP SCREW
3. Hook the larger-diameter eyelet of the
cable to the foot-pedal bracket.
4. Thread the cable up through the base-
plate opening.
5. Wrap the cable ¼-tum around the
pulley and bring out through the notch
toward the cap screw.
6. Wrap the cable twice around the cap
screw in a clockwise direction.
7. Bring the cable back through the notch
and wrap one and one-half turns around
the pulley.
8. Attach the smaller eyelet on the
cable to the cable spring.
Note: You may find it helpful to
compress the baseplate
slightly and extend the cable
spring during Step 8.