Star Tech Journal

lO _ _ _ _ _ _ _ _ _ _ S~RJECH
Exidy "Targ" Monitor Harness Mod
COLOR ADAPTER PCB
ELECTROHOME TO WELLS GARDNER
MAIN HARNESS MODIFICATION
J21
10
9
8
5
2
3
6
1
-
7
4
ON J201 6 PIN TV MONITOR
CONNECTOR:
1. REMOVE ALL Pl NS FROM
CONNECTOR HOUSING .
. 2. RE INSERT Pl NS AS FOLLOWS:
GRN ON GRY TO PIN 1
BLU ON GRY TO PIN 2
WHT ON BRN TO PIN 3
RED ON GRY TO PIN 4
GRN TO PIN 5
WHT ON GRY TO PIN 6
Midway
"Space Encounters"
Power Supply Mod
MONITOR VI
J201
GRN ON GRY
BLU ON GRY
WHT ON BRN
RED ON GRY
GRN
WHT ON GRY
1
2
3
4
5
6
----
GREEN DATA
BLUE DATA
NC (NO FUNCTION)
RED DATA
GROUND
CSYNC
ON J21 10 PIN COLOR ADAPTER
PCB CONNECTOR:
1. REMOVE PIN 5 AND INSERT IN PIN 4
NOTE: IN CONJUNCTION
WITH THESE ALTERATIONS
THE "SYNC" SPLIT-PAD
JUMPER ON THE COLOR
BOARD MUST BE CUT.
Condition:
The power supply +5 voltage may shut down
in certain games due to an overload. The
0.18 5 watt resistor tolerance will affect the
+5 volts shut down.
Modification:
1. Replace the 0.18 resistor with a 5%
tolerance if available.
2. Parallel a 1 .5 1 watt resistor across the
0.18 resistor (rear side).
3. Check game electrically.
Note: This power supply overload only
occurs in "Space Encounters."