Play Meter
Issue: 1982 September 15 - Vol 8 Num 18 - Page 71
Game
power
Up to 150 loose or wrapped notes of the
same denomination can be counted in a
single weighing. The value is shown on a
liquid crystal display in less than half a
second.
The accuracy of the load cell and cali-
bration ensures that irregularities (such as
torn. taped. and incomplete notes) are
detected. The machine displays the word
"help" rather than give an incorrect
reading.
When used for counting coins. the
Tellermate can handle up to 4.4 pounds per
single weighing.
A switch to different currencies can be
ma de in seco nd s with interchangeable
memory modules . The machine is said to
be reliable and easy to maintain because it
has no moving parts .
The results of each weighing can be
j!dded to display totals by denomination,
and the value of all money that has passed
through the machine during a shift can be
indicated. An optional printer provides a
permanent record of transactions.
Measuring 10.4 inches by 7.3 inches. the
counter can be used at any desk .
Inquiries from prospective U.S. cus-
tomers , distributors. and agents ma y be
sent t o British Information Services. 845
Third Ave ., New York , NY 10022,
Telephone : 212 /7 52-8400.
The Perkam Ltd. (Contact: Edgar Bliss,
director), is located at 7 Rosehart Mews.
London W II 3LA England . Telephone:
01-221 3877. Telex: 28742.
The Signatron Power Supp(l' Unit is
produced domestically. and it has fewer
components than competitive models.
Therefore fewer components fail. the
company claims.
"This is not an infamous failure-prone.
switching regulator that's loaded with
exotic parts from far-off la nd s. You could
lose the whole unit for the want of a simple
part." Signatron oft 1c;a1s said.
The Signatron Power Supply Unit has a
rugged and linear electronic design with
better transient suppression capabilities
and an overload protection sys tem that is
superior to anything on a switching
regulator. It won't blow out costly boards.
the compan y claims.
"Here's a power s upply that won't fail
yo u! Simple design. fewer parts. and
rugged construction guarantee a power
source that virtually eliminates "down-
time." officials said.
The Signatron Po wer Supph · Unit's out-
put is rated at 3 amps on +5vDC and I amp
on - 5 and+ 12vDC. Built to specifications.
Signatron will design power supply units
with any three voltages.
The compact (3.5 inch by 3.5 inch by
nine inch) Signatron Power Supplr Unit is
housed in an attractive. well-ventilated
gold and black annodi7ed case . It mounts
an ywhere - any level or plane without the
need for modification . A screwdriver is
only needed to connect the harness and AC
line cord.
A complete power module contains the
Signatron Power Supply Unit, EM filter,
fuse. 8 inch grounded AC line cord , and
harness. All you do is plug it in. In any
configuration, Signatron :S Power Supplr
Unit has three output voltages. Ex: +5 I - 5 I
+ 12vDC.
Call 213 ( 768-7144 in Los Angeles for
an immediate response. Specify for OEM .
The Signatron Power Supply Unit is
fully guaranteed against defects for one
year from date of purchase when properly
installed to specifications.
Dimension : 9.0 inches long. 3.5 inches
wide. 3.5 inches high with full-length
mounting nangs.
Linear power output: +5 vDC at 3 amps.
5vDC at I amp. =12vDC at I amp.
Other configurations: On special orders
of 50 unit s or more. th e power supply can
be delivered with any three voltages
necessry for special applications. The
same appleis to output amperages.
Larger
dot
matrix
The Component Products Division of
Industrial Electronic Engineers Inc ..
manufacturer of a wide variety of elec-
tronic displa ys and innovator in the switch
marketplace, has added a single 1.16 inch
character. red LED utili7ing the popular 5
by 7 dot matrix format.
The new LR/257R incorporates a dot
size 50 percent larger than the widely
acclaimed LR/057R, making readabilit y
easier at extreme viewing distances and is
identical in form, fit , and function. In
appeara nee. this display has a gray face
and white body with dots appearing to be
translucent when not lit. Each display is
side stackable, enabling engineers to
design such applications as walking signs
to any desired length required and is com-
patible with ASCII and EBCID!Cformat s
further simplifying multiplexed designs.
Availablit y is stock to six weeks, pricing
is less than $4 for OEM quantities.
For further information regarding
specifications, pricing, and availability,
contact Lou Hronek . Product Marketing
Manager. Component Products Division.
lEE. 7740 Lemona Ave. , Van Nuys. CA
91405 . 213 787-0311. ext. 392.
Need a shopping list?
Check out the Oct. 1
Buyers' Guide
PLAY METER, September 15, 1982
77
power
Up to 150 loose or wrapped notes of the
same denomination can be counted in a
single weighing. The value is shown on a
liquid crystal display in less than half a
second.
The accuracy of the load cell and cali-
bration ensures that irregularities (such as
torn. taped. and incomplete notes) are
detected. The machine displays the word
"help" rather than give an incorrect
reading.
When used for counting coins. the
Tellermate can handle up to 4.4 pounds per
single weighing.
A switch to different currencies can be
ma de in seco nd s with interchangeable
memory modules . The machine is said to
be reliable and easy to maintain because it
has no moving parts .
The results of each weighing can be
j!dded to display totals by denomination,
and the value of all money that has passed
through the machine during a shift can be
indicated. An optional printer provides a
permanent record of transactions.
Measuring 10.4 inches by 7.3 inches. the
counter can be used at any desk .
Inquiries from prospective U.S. cus-
tomers , distributors. and agents ma y be
sent t o British Information Services. 845
Third Ave ., New York , NY 10022,
Telephone : 212 /7 52-8400.
The Perkam Ltd. (Contact: Edgar Bliss,
director), is located at 7 Rosehart Mews.
London W II 3LA England . Telephone:
01-221 3877. Telex: 28742.
The Signatron Power Supp(l' Unit is
produced domestically. and it has fewer
components than competitive models.
Therefore fewer components fail. the
company claims.
"This is not an infamous failure-prone.
switching regulator that's loaded with
exotic parts from far-off la nd s. You could
lose the whole unit for the want of a simple
part." Signatron oft 1c;a1s said.
The Signatron Power Supply Unit has a
rugged and linear electronic design with
better transient suppression capabilities
and an overload protection sys tem that is
superior to anything on a switching
regulator. It won't blow out costly boards.
the compan y claims.
"Here's a power s upply that won't fail
yo u! Simple design. fewer parts. and
rugged construction guarantee a power
source that virtually eliminates "down-
time." officials said.
The Signatron Po wer Supph · Unit's out-
put is rated at 3 amps on +5vDC and I amp
on - 5 and+ 12vDC. Built to specifications.
Signatron will design power supply units
with any three voltages.
The compact (3.5 inch by 3.5 inch by
nine inch) Signatron Power Supplr Unit is
housed in an attractive. well-ventilated
gold and black annodi7ed case . It mounts
an ywhere - any level or plane without the
need for modification . A screwdriver is
only needed to connect the harness and AC
line cord.
A complete power module contains the
Signatron Power Supply Unit, EM filter,
fuse. 8 inch grounded AC line cord , and
harness. All you do is plug it in. In any
configuration, Signatron :S Power Supplr
Unit has three output voltages. Ex: +5 I - 5 I
+ 12vDC.
Call 213 ( 768-7144 in Los Angeles for
an immediate response. Specify for OEM .
The Signatron Power Supply Unit is
fully guaranteed against defects for one
year from date of purchase when properly
installed to specifications.
Dimension : 9.0 inches long. 3.5 inches
wide. 3.5 inches high with full-length
mounting nangs.
Linear power output: +5 vDC at 3 amps.
5vDC at I amp. =12vDC at I amp.
Other configurations: On special orders
of 50 unit s or more. th e power supply can
be delivered with any three voltages
necessry for special applications. The
same appleis to output amperages.
Larger
dot
matrix
The Component Products Division of
Industrial Electronic Engineers Inc ..
manufacturer of a wide variety of elec-
tronic displa ys and innovator in the switch
marketplace, has added a single 1.16 inch
character. red LED utili7ing the popular 5
by 7 dot matrix format.
The new LR/257R incorporates a dot
size 50 percent larger than the widely
acclaimed LR/057R, making readabilit y
easier at extreme viewing distances and is
identical in form, fit , and function. In
appeara nee. this display has a gray face
and white body with dots appearing to be
translucent when not lit. Each display is
side stackable, enabling engineers to
design such applications as walking signs
to any desired length required and is com-
patible with ASCII and EBCID!Cformat s
further simplifying multiplexed designs.
Availablit y is stock to six weeks, pricing
is less than $4 for OEM quantities.
For further information regarding
specifications, pricing, and availability,
contact Lou Hronek . Product Marketing
Manager. Component Products Division.
lEE. 7740 Lemona Ave. , Van Nuys. CA
91405 . 213 787-0311. ext. 392.
Need a shopping list?
Check out the Oct. 1
Buyers' Guide
PLAY METER, September 15, 1982
77
Future scanning projects are planned by the International Arcade Museum Library (IAML).