Music Trade Review
Issue: 1915 Vol. 60 N. 8 - Page 47
Music Trade Review -- © mbsi.org, arcade-museum.com -- digitized with support from namm.org
THE MUSIC TRADE REVIEW
make an occasional try now and then and guess at
it from the results is not satisfactory. It will take
a whole series of careful, analytical experiments to
determine the whyfor of speed in wood sanding,
and it is time for us to have a series of these, for
We are right now at a point in machine sanding when we get through them if they have been han-
progress in cabinet work where we really need lots dled right, we will have some definite information
of experiments, which will give us more definite that will be of material value to the woodworking
information on sanding speeds and why. The fraternity and do much to put sanding upon a posi-
sanding speed in mind now is not the rate at which tive basis for results and efficiency.
one may finish off and turn out work, but the speed
THE IDEAL FACTORY TRUCK.
at which sandpaper on drums, or sand belts, should
move to do the most satisfactory work and give The One Best Suited for the Piano and Veneer
the best results generally. There are people who
Factory Is One with Ball Bearings or Roller
argue that speed is an important item in the suc-
Bearings That Will Run Easily and Require
cessful operation of either a drum sander or of a
but Little Power to Push and Guide I t —
sand belt, but there is not enough clear-cut ex-
Rubber Tires Worth Consideration.
planations of why such and such speeds are better.
When it comes to results in the finished work we
T!ie ideal truck for the veneer, furniture and
get excellent finish from hand sanding where the piano factory and other places where veneered
speed is nothing compared to the very slowest
work is used, is one with hall hearings or roller
speed in machine sanding. Therefore it is in order bearings, or one designed in some way so that it
to have more definite understanding as to what, runs easily and requires but little power to push
other than capacity, is gained by speed in machine and guide it. A well-informed veneer manufac-
sanding. One authority, for instance, says that for turer offers in addition to this qualification the
a threedrum sander with rolls eleven inches in suggestion that the ideal truck for warehouse and
diameter, the first two drums should run 1,200 inside factory use should also have rubber tires.
revolutions a minute, and the third or finishing
He supported the rubber tire idea with the argu-
drum 1,500. Now what we need when a statement ment that such a truck will not only run with more
like this is made is some explanation of the why ease and less shaking and jarring, but if a wheel
for of this difference. Why should coarse sand- runs over a piece of veneer on the floor or against
paper be run at a higher speed than fine paper? a pile of veneer in the shop or warehouse, it will
One of the things we learned about abrasive wheels, not do the same violence to it that is done by the
those used for grinding metal, was that in the first regular metal wheel.
development everybody got the speed mania and
The rubber tire idea sounds a little suggestive of
lots of knives and saws were being spoiled by run- luxury in trucks, but the history of industrial prog-
ning these wheels at too high a speed, says the ress in this country should furnish plenty of evi-
Furniture Manufacturer and Artisan. The result dence that often what may seem a luxury to-day be-
was heating and burning, and by and by, when at- comes a necessity to-morrow, an,d many of the
tention was centered on this and analytical study things that seem luxuriant and extravagant in fac-
was followed, the speed of knife grinding abrasive tory construction and equipment really prove good
wheels was cut down in some instances to one- business investments.
third what had originally been thought right. We
Ease of running, whether it be obtained by ball
may discover something of the same thing in the bearings, roller bearings, or some other special de-
sander business. Whatever the final results may- sign or provision for lubrication, is not a matter of
be, the thing that we need right now is a series of luxury, but a matter of conservation of energy and
experiments connected with analytical study to of efficiency in modern equipment. The easy run-
determine what are the proper speeds for sanding, ning truck not only saves human power, which is
and why. If there should be different speeds for the most expensive power the factory uses, but it
different degrees of fineness in the sand, we should encourages rapid movement. Also, when a truck
have these determined and carefully tabulated. To moves easily it is also easy to guide, and there is
less likelihood of bumping it into piles of veneer,
panels or ether work about the factory or ware-
house.
Other factors enter into the making of the ideal
truck,
says Veneers, such as shape, size and ar-
CINCINNATI, O.
rangement to fit in with the needs of the particular
Importers a n d Manufacturers of purpose for which it is to be used, but no matter
Figured Mahogany, Circassian Wal- what other qualities are considered necessary to
nut and Foreign Woods for high- constitute the ideal truck, ease of movement is al-
grade piano cases and cabinets. ways a factor—enough of a factor, indeed, that
one can hardly consider a truck ideal until some
New York Office and Sample Room
regard has been shown to this feature.
MACHINE SANDING SPEEDS.
Diversity of Opinion Regarding the Speeds
That Insure the Best Results—Danger of
Too High Speed Has Been Proven.
The Ohio Veneer Co.
Grand Central Palace Building
Lexington Ave. and 46th St.
G. H. V AUG HAN, Eastern Representative
GRUBB & KOSEGARTEN BROS.
Manufacturers ol HIGH GRADE
PIANO-FORTE ACTIONS
N A S S A U . Rensselaer County, INT. Y .
WHITE, SON COMPANY
H anuf *otur*ra
ORGAN AND PLAYER-PIANO LEATHERS
330>340 Atlantic Av*nu«, Boston. M a s s .
sorts did much to weaken prices on the Para
grades. Receipts of smoked sheets have been none
too liberal here since the embargo was raised,
and this rubber was quoted yesterday at 61 cents.
Pale crepe was held at 58 cents. The tone of the
English market was reported firmer this week,
but it had little effect on the trading here, which
was dull.
NEW FORESTS FOR NATION.
Lands in New Hampshire and the South to Be
Acquired—An Important Move.
(Special to The Review.)
WASHINGTON, 1). C... February 15.—The National
Forest Reservation Commission to-day approved
the purchase of 35,370 acres, in addition to the
1,414,208 acres already approved for purchase, for
national forests in the White Mountains of New
England and the Southern Appalachian region.
The lands have been examined and appraised and
sales contracts will be made with the owners by
the Secretary of Agriculture as soon as possible.
The land to be immediately acquired consists
of 11,970 acres in the White Mountain area of
New Hampshire, 9,828 acres in the While Top
area of Virginia, 705 acres in the Shenandoah area
of Virginia, 9,120 acres in the Mount Mitchell area
of North Carolina, and 3,747 acres in the Savan-
nah area of North Carolina. The total amount
of money involved is $233,038, which will be paid
out of the $1,375,000 still available under the
Weeks law.
The owners have already agreed to sell at what
are regarded as very reasonable prices. Practical-
ly all of the land is mountainous, non-agricultural,
and valuable for forests and watershed protection.
Much of it has been culled, but several large tracts
are heavily timbered. The purchase of the White
Mountain acreage will require $03,984.50, at an
average rate of $4.65 an acre; the White Top,
$44,232.50, at $4.50 an acre; the Shenandoah,
$3,736, at $3.80 an acre; the Mount Mitchell,
$99,840, at $10.95 an acre, and the Savannah,
$21,245, at $5.67 an acre. As soon as the pur-
chases are completed by the Secretary of Agricul-
ture the lands will pass into the jurisdiction of the
Forest Service, which will begin their develop-
ment as national forests for the use of the public.
PIANO PARTS MANUFACTURING CO.
(Special to The Review.)
CHICAGO, I I I . , February 15.-—The Piano Parts
Manufacturing Co. has just been incorporated in
this city, with a capital stock of $5,000, for the
purpose of manufacturing and dealing in piano
parts, etc.
H
OFFMAN BROS. CO.
FORT WAYNE, IND.
(Est. 1867)
(Inc. 1904)
Specialties, Hardwood, Veneers, and
Lumber for Musical Instruments.
REG.US PAT
CRUDE RUBBER PRICES WEAKER.
The raising of the English embargo on crude
rubber shipments to this country, under certain
restrictions, has resulted in a general weakening
of prices in this market. The best grade of Para
rubber, up-river fine, was obtainable here Mon-
day at hlV'i cents a pound, spot. This figure was
said to be the lowest quoted in this market since
1882. There was no embargo on the Brazilian
rubbers, but the removal of that on the Eastern
OFF
VENEERS
Piano Manufacturers ^
p
£ 3
soft yellow poplar for cross band-
ing is unapproached in this country.
A large supply always on hand.
The Central Veneer Co., Huntington, W. Va.
SOSS INVISIBLE HINGES
"OUT OF SIGHT
EVER IN MIND"
When you fail
to see an un-
sightly hinge
protruding you
know SOSS is
the answer.
No. 101
Write to-day,
ATLANTIC AVE.
SOSS MFG. GO - I 435 BROOKLYN,
N. Y.
THE MUSIC TRADE REVIEW
make an occasional try now and then and guess at
it from the results is not satisfactory. It will take
a whole series of careful, analytical experiments to
determine the whyfor of speed in wood sanding,
and it is time for us to have a series of these, for
We are right now at a point in machine sanding when we get through them if they have been han-
progress in cabinet work where we really need lots dled right, we will have some definite information
of experiments, which will give us more definite that will be of material value to the woodworking
information on sanding speeds and why. The fraternity and do much to put sanding upon a posi-
sanding speed in mind now is not the rate at which tive basis for results and efficiency.
one may finish off and turn out work, but the speed
THE IDEAL FACTORY TRUCK.
at which sandpaper on drums, or sand belts, should
move to do the most satisfactory work and give The One Best Suited for the Piano and Veneer
the best results generally. There are people who
Factory Is One with Ball Bearings or Roller
argue that speed is an important item in the suc-
Bearings That Will Run Easily and Require
cessful operation of either a drum sander or of a
but Little Power to Push and Guide I t —
sand belt, but there is not enough clear-cut ex-
Rubber Tires Worth Consideration.
planations of why such and such speeds are better.
When it comes to results in the finished work we
T!ie ideal truck for the veneer, furniture and
get excellent finish from hand sanding where the piano factory and other places where veneered
speed is nothing compared to the very slowest
work is used, is one with hall hearings or roller
speed in machine sanding. Therefore it is in order bearings, or one designed in some way so that it
to have more definite understanding as to what, runs easily and requires but little power to push
other than capacity, is gained by speed in machine and guide it. A well-informed veneer manufac-
sanding. One authority, for instance, says that for turer offers in addition to this qualification the
a threedrum sander with rolls eleven inches in suggestion that the ideal truck for warehouse and
diameter, the first two drums should run 1,200 inside factory use should also have rubber tires.
revolutions a minute, and the third or finishing
He supported the rubber tire idea with the argu-
drum 1,500. Now what we need when a statement ment that such a truck will not only run with more
like this is made is some explanation of the why ease and less shaking and jarring, but if a wheel
for of this difference. Why should coarse sand- runs over a piece of veneer on the floor or against
paper be run at a higher speed than fine paper? a pile of veneer in the shop or warehouse, it will
One of the things we learned about abrasive wheels, not do the same violence to it that is done by the
those used for grinding metal, was that in the first regular metal wheel.
development everybody got the speed mania and
The rubber tire idea sounds a little suggestive of
lots of knives and saws were being spoiled by run- luxury in trucks, but the history of industrial prog-
ning these wheels at too high a speed, says the ress in this country should furnish plenty of evi-
Furniture Manufacturer and Artisan. The result dence that often what may seem a luxury to-day be-
was heating and burning, and by and by, when at- comes a necessity to-morrow, an,d many of the
tention was centered on this and analytical study things that seem luxuriant and extravagant in fac-
was followed, the speed of knife grinding abrasive tory construction and equipment really prove good
wheels was cut down in some instances to one- business investments.
third what had originally been thought right. We
Ease of running, whether it be obtained by ball
may discover something of the same thing in the bearings, roller bearings, or some other special de-
sander business. Whatever the final results may- sign or provision for lubrication, is not a matter of
be, the thing that we need right now is a series of luxury, but a matter of conservation of energy and
experiments connected with analytical study to of efficiency in modern equipment. The easy run-
determine what are the proper speeds for sanding, ning truck not only saves human power, which is
and why. If there should be different speeds for the most expensive power the factory uses, but it
different degrees of fineness in the sand, we should encourages rapid movement. Also, when a truck
have these determined and carefully tabulated. To moves easily it is also easy to guide, and there is
less likelihood of bumping it into piles of veneer,
panels or ether work about the factory or ware-
house.
Other factors enter into the making of the ideal
truck,
says Veneers, such as shape, size and ar-
CINCINNATI, O.
rangement to fit in with the needs of the particular
Importers a n d Manufacturers of purpose for which it is to be used, but no matter
Figured Mahogany, Circassian Wal- what other qualities are considered necessary to
nut and Foreign Woods for high- constitute the ideal truck, ease of movement is al-
grade piano cases and cabinets. ways a factor—enough of a factor, indeed, that
one can hardly consider a truck ideal until some
New York Office and Sample Room
regard has been shown to this feature.
MACHINE SANDING SPEEDS.
Diversity of Opinion Regarding the Speeds
That Insure the Best Results—Danger of
Too High Speed Has Been Proven.
The Ohio Veneer Co.
Grand Central Palace Building
Lexington Ave. and 46th St.
G. H. V AUG HAN, Eastern Representative
GRUBB & KOSEGARTEN BROS.
Manufacturers ol HIGH GRADE
PIANO-FORTE ACTIONS
N A S S A U . Rensselaer County, INT. Y .
WHITE, SON COMPANY
H anuf *otur*ra
ORGAN AND PLAYER-PIANO LEATHERS
330>340 Atlantic Av*nu«, Boston. M a s s .
sorts did much to weaken prices on the Para
grades. Receipts of smoked sheets have been none
too liberal here since the embargo was raised,
and this rubber was quoted yesterday at 61 cents.
Pale crepe was held at 58 cents. The tone of the
English market was reported firmer this week,
but it had little effect on the trading here, which
was dull.
NEW FORESTS FOR NATION.
Lands in New Hampshire and the South to Be
Acquired—An Important Move.
(Special to The Review.)
WASHINGTON, 1). C... February 15.—The National
Forest Reservation Commission to-day approved
the purchase of 35,370 acres, in addition to the
1,414,208 acres already approved for purchase, for
national forests in the White Mountains of New
England and the Southern Appalachian region.
The lands have been examined and appraised and
sales contracts will be made with the owners by
the Secretary of Agriculture as soon as possible.
The land to be immediately acquired consists
of 11,970 acres in the White Mountain area of
New Hampshire, 9,828 acres in the While Top
area of Virginia, 705 acres in the Shenandoah area
of Virginia, 9,120 acres in the Mount Mitchell area
of North Carolina, and 3,747 acres in the Savan-
nah area of North Carolina. The total amount
of money involved is $233,038, which will be paid
out of the $1,375,000 still available under the
Weeks law.
The owners have already agreed to sell at what
are regarded as very reasonable prices. Practical-
ly all of the land is mountainous, non-agricultural,
and valuable for forests and watershed protection.
Much of it has been culled, but several large tracts
are heavily timbered. The purchase of the White
Mountain acreage will require $03,984.50, at an
average rate of $4.65 an acre; the White Top,
$44,232.50, at $4.50 an acre; the Shenandoah,
$3,736, at $3.80 an acre; the Mount Mitchell,
$99,840, at $10.95 an acre, and the Savannah,
$21,245, at $5.67 an acre. As soon as the pur-
chases are completed by the Secretary of Agricul-
ture the lands will pass into the jurisdiction of the
Forest Service, which will begin their develop-
ment as national forests for the use of the public.
PIANO PARTS MANUFACTURING CO.
(Special to The Review.)
CHICAGO, I I I . , February 15.-—The Piano Parts
Manufacturing Co. has just been incorporated in
this city, with a capital stock of $5,000, for the
purpose of manufacturing and dealing in piano
parts, etc.
H
OFFMAN BROS. CO.
FORT WAYNE, IND.
(Est. 1867)
(Inc. 1904)
Specialties, Hardwood, Veneers, and
Lumber for Musical Instruments.
REG.US PAT
CRUDE RUBBER PRICES WEAKER.
The raising of the English embargo on crude
rubber shipments to this country, under certain
restrictions, has resulted in a general weakening
of prices in this market. The best grade of Para
rubber, up-river fine, was obtainable here Mon-
day at hlV'i cents a pound, spot. This figure was
said to be the lowest quoted in this market since
1882. There was no embargo on the Brazilian
rubbers, but the removal of that on the Eastern
OFF
VENEERS
Piano Manufacturers ^
p
£ 3
soft yellow poplar for cross band-
ing is unapproached in this country.
A large supply always on hand.
The Central Veneer Co., Huntington, W. Va.
SOSS INVISIBLE HINGES
"OUT OF SIGHT
EVER IN MIND"
When you fail
to see an un-
sightly hinge
protruding you
know SOSS is
the answer.
No. 101
Write to-day,
ATLANTIC AVE.
SOSS MFG. GO - I 435 BROOKLYN,
N. Y.
Future scanning projects are planned by the International Arcade Museum Library (IAML).