July 1997
SEGA PINBALL
THE STAR WARS TRIWGY
RESET ALIGNMENT BRACKET
KIT
TEAM SEGA PINBALL
Joe Blackwell, Eric Winston, Doug Lemons,Jay Alfer
Sega Pinball, Melrose Park, Illinois
SUBJECT
PROCEDURE
Addition of Reset Alignment
Bracket Kit Part N° 500-6210-00.
1. Attach one ( 1)
Reset
Align.
Bracket on each
side over the exist-
ing two (2) 4/=8-32
Mounting Screws
securing
the
Height
Adj.
Bracket.
SYMPI'OM
Drop Targets intermittently stick
in the "Up Position." Game vi-
bration normally will free them.
EXPLANATION
I
The Drop Target Lift Bracket on
occasion will tum & bind in the
Target Support Brackets. Lubri-
eating the side flanges that guide
the Lift Bracket Up and Down
will correct this problem. We rec-
ommend using White Lithium
Grease or a "dry" lubricant such
as Teflon Spray. To ensure a
maintenance free assembly we
have added alignment brackets
to all current assemblies which
act as a backplate thus limiting
the left & right movement of the
Lift Bracket (this eliminates the
need for lubrication). Using the
Reset Alignment Bracket Kit
( containing: Reset Alignment
Brackets, 535-8065-00, 2 Ea. and
#8-32 Keps Nut, 240-5104-00, 4
Ea.) follow the simple procedure
below in lieu of lubrication.
Front
.....
,
I' I (
I \
l
THE
.ITAIL
"r.llLOGY
2. Secure the new
brackets on each
side with 4/=8-32
Keps Nuts ( 1 per
existing screw).
MANUAL UPDATE
Write the items
and quantities con-
tained in the Sub-
ject Kit into Sec-
tion 4, Chapter 2,
Page 77 in the Star
Wars Trilogy- Spe-
cial
Edition
Manual.
Reset Alignment
Bracket, Qty. 2,
535-8065-00
Lubricate the side
flanges of the un
Bracket & eight
(BJ "side flanges"
that guide the Lift
Bracket Up &
Down OR attach
the subject Align-
ment Brackets.
#8-32 Keps Nut, Qty. 4,
240-5104-00