Star Tech Journal

Issue: 1996-December - Vol 18 Issue 10

STAR*TEcH
Journal
December 1996
CD
SEGA
VIR1VA0H
TROUBLESHOOTING CHECKLIST
Sega Technical Services
Sega Gameworks LLC
Fremont, California
.:-:·
:r~~:u,:1.;;,;.,;
PROBLEM
Wheti the ;inalb SWtstu:rµ.ed on,
the machine is.not activated~
l
• . . . .
.. ,-~ ~ . w ¼ W l
PB.0•1•:
w
The color oi image on.Jnoitifut
sereen'i$int;tp-ect.
l
I
CAUSE
Connector connection is incor-
rect.
SOLUTION
CAUSE
CAUSE
The power is not on.
Incorrect monitor adjustment.
SOLUTION
SOLUTION
Firmly insert plug into outlet.
Make appropriate adjustments.
Check connector connection
from speaker.
~a~
CAUSE
.. , , ·on ate unsatisfacto.ry<>
., ll,011•
Incorrect power source/voltage.
'Ihe OJl,,,SCl'OO!)..im.age ofth.emem-
SOLUTION
tor sways anti/or sb.rinb.
D8$h'ab.d Shot but-
CAUSE
Make sure that the power sup-
ply /voltage are correct.
CAUSE
SOLUTION
CAUSE
The power source and voltage
are not correct.
SW replacement. Finger SW Part
No. 509-5664 Thumb SW Part
No. 509-5677 SW Micro Type
Part No. 509-5466
Fuse blown due to instantaneous
overcurrent.
SW malfunctioning.
SOLUTION
SOLUTION
Make sure that power supply and
voltage are correct.
Remove the cause of overload
and replace the fuse.
h<>•.t.:n(
Sound is not.emitted.
~•x.
Fluorescent l-.mp cloesn'tlight
up.
PROBLEM
Does not finish network check.
CAUSE
CAUSE
CAUSE
Sound volume adjustment is not
correct.
Fluorescent lamp needs replace-
ment.
SOLUTION
SOLlITION
Adjust the switch unit's sound
adjustment volume (control).
Replace the fluorescent lamp.
Unsatisfactory connection of op-
tic fiber between the 2 seats.
SOLUTION
Check optic fiber connection.
CAUSE
CAUSE
Malfunctioning BD and Amp.
Connector connection is incor-
rect.
Communication play setting error.
SOLUTION
SOLUTION
SOLlITION
Perform sound test.
Check connector connections in
the Billboard.
CAUSE
Communication play setting.
December 1 996
CD
STAR*TECH
Journal
SEGA DAYTONA
No FEEDBACK FROM STEERING MoroR
Sega Technical Services
Sega Gameworks LLC
Fremont, California
STEPS TO CORRECT
WIRING PROBLEM
NOTE
SOLUTION
This bulletin applies to the
Daytona LE Games only.
Perform the test listed below, and
follow the appropriate instruc-
tions.
• 1. Tui:n power off. Open the PC
L bqa:rd cage and locate the I/O
j board (837~10539)
No feedback from the steering
motor.
1. Put machine into "Drive BD
Test"
2. Locate CN5 ancl unplug it
from the board (See figure 1)
CAUSE
2. Read the value next to the line
"Handle=". If it is "FF" then pro-
ceed with the steps below. If the
value is at or near "80" then your
machine is fine, and no correc-
tion is necessary.
3. Move the White/Black wire
. from Pin 11 of the connector to
Pin 12, (See figure 2}
PROBLEM
Mis-wiring of the connector at
CNS of the 1/0 board.
4. Re~jnstall the conµector, and
• power up your machine to verify
proper operation. Close up ma-
chine.
Figure 1
Figure 2
@]
@]
@]
@]
Pin 1
/
/
/
CNS/
~
Be sure that there is
no wire at pin 11 and a
White Wire with a Black Stripe
at pin 12.

Download Page 6: PDF File | Image

Download Page 7 PDF File | Image

Future scanning projects are planned by the International Arcade Museum Library (IAML).

Pro Tip: You can flip pages on the issue easily by using the left and right arrow keys on your keyboard.