m
January 1993
The problem we had with our
Star Wars Pinballwas with the
plunger that kicks the ball from
the lower level to the upper
playfield. It would seem that it
tried to kick two balls at the
same time, in multi-ball play, and
broke the plunger. I don't know if
this is a wide spread problem or
not, but I can see it happening
again.
ST AR*TECH Journal
overhead ramps. The longevity
may be in question.
I do like the dot matrix display,
though. The combination of
sound, playfield, and dot matrix
display is done to the same
excellence of all Data East
Pinballs.
I think Data East does sound,
playfield, and dot matrix display
combination better than any
other pinball manufacturer.
Along with their excellent digi-
tal flippers, and popular theme's.
I think Data East pinballs are
the top of the line pinball ma-
chines.
WIWAMS
PINMLL CotN PooR CREl1trn
6-SMARTfnr
The other thing I didn't like was
that there is no post to hold up
the playfield for servicing. When
your working on just the flippers
(which doesn't happen much on
Data East flippers), the short
posts make you kneel to service
the flippers or you may have to
put the playfield up if your only
5'8" or smaller.
I.ms
As far as play goes, it was
getting plenty of play for the
first week. For a Data East
pinball though, it doesn't have as
much going on as other Data
East playfields, not as many
Todd Erickson
Summit Amusement
St. Paul, Minnesota
NOTE
PRD,L£M
For the first time ever, I had a
customer get free credits on a
Williams pinball, Addam's Family.
Try hitting your coin door to
verify if you have this condition.
SownoN
If the tilt
doesn't work,
adjust the coin
door
slam
switch.
The
weight should
be against the
coin door.
I would like to see the tilt slam
have the effect of a hard slam.
It would be enabled if there are
2 or more tilts within a 60
second period. This would then
take all remaining games off. A
"smart tilt" system.
oon·T~ use PETROLELm DIS I LLATE
( !l.! '
i~
PLAYFIELD
CG
I~
CLE.A"lERS
~
on pinball machines with mylar shields. (Those old clean-
ers dissolve the mylar adhesive causing them to peel off.)
Major pinball manufacturers recommend Novus pol-
ishes (#1 for regular cleaning, #2 for heavy dirt removal).
Novus #1 - 8oz ... $3.10 Case (12) ... $36
• Novus #2 - 8oz ... $4.29 Case (12) ... $48
2401 Sunset W. Columbia SC 29169
,:".ti)
.
V
803/796-0265
Fx: 803/794-5692