Star Tech Journal

Issue: 1992-July - Vol 14 Issue 5


July 7992
STAR*TECH Journal
~~_;
THE HUNT IS ON ...
Jc:>LITl7Ef'I
Post Office Box 1065
18 North Centre Street
Merchantville
New Jersey 08109
Phone: 609.662.1080
Fax: 609.662.0537
Bbs: 404.631.2928
Publisher/Editor:
Office Manager:
Contributors:
... For Your New Coin-op Customersl
Let STAR*TECHJournal's Master Mail List help
you search for new customers. The List has
just been cleaned and is now available for
your rental order.
James Calore
Sharon locono
Gary A. Hughes
Kerry Messana
John T. Moon II
Donald B. Prince
David G. Stahley
Phil Stracke
Todd Tuckey
Al Vernon
Don Wright
This is the most accurate and comprehen-
sive mail list in the Coin-op Industry. All names
not responding to one of our mailings in the
last two years have been eliminated.
Call or fax S*TJ today for the most recent
state totals and List totals.
Phone: 609/662-1080 • Fax: 609/662-0537
JAMMA Test Card
DESIGNED FOR THE GAMES TECHNICIAN
STAR*TECH Journal, July, 1992, Volume 14, Num-
ber 5, Copyright ©1992 by Star Tech Journal, Inc. All
rights reserved. Information contained herein is verified
whenever possible but S* TJ is not responsible, how-
ever, for damages which may occur from implementing
this information. Address inquiries to: PO Box 1065,
Merchantville, NJ 08109. Phone: 609/662-1080. Fax:
609/662-0537. Subscription rates (one year): USA
$81.00. Canada $92.00 (US funds). Other Countries
$144.00 Air Mail (US funds).
POSTMASTER: Send address changes to
STAR* TECH Journal, PO Box 1065, Merchantville, NJ
.~ 08109. STAR*TECHJournal(ISSN0739-1048) is pub-
lished monthly by Star Tech Journal, Inc., 18 North
Centre Street, Merchantville, NJ 08109. Second Class
postage paid at Camden, NJ.
Check out the entire game wiring system
before
you plug in that $1000 game board!
~Q~/~~~= 1 9~9
<
Qtcf¢tPr~pqfq(ctgg $4Y§J1$/15) qfQQQ t
r
PQ•.i?.9¥JQq§2M¢rcfJQQf)lfJJeJ NJ:••.98.1Qg••·
s!AislT$~t1zyp9r991
.•>
Name _ _ _ _ _ _ _ _ _ _ _ _ _
Company _ _ _ _ _ _ _ _ _ _ _ _
Address _ _ _ _ _ _ _ _ _ _ _ _
City/State/Zip _ _ _ _ _ _ _ _ _ _
a Prepaid
acoo
a
STAR*TECH Joumal
MIDWAY
NSMESIV-
ADDAMS
FAMILY BLOWN
CDT1TLE
HOLDER STACK
July 1992
C
A
L
L
STAR*TECH JOURNAL
F1RST FoR ALL VouR
TEST EQUIPMENT NEEDS
DIGITAL MunMETERS
FUSES
NOTES
PARTS TESTERS
David G. Stahley
Snyder Amusement Co.
Easton, Pennsylvania
Phil Stracke
Kapsalis Enterprises Ltd
Scarborough, Ontario, Canada
SUBJECT
SUBJECT
Addams Family pinball intermit-
tent blown fuses.
NSM ESN-CD Title Strip jams
and moving precautions.
SYMPOOM
PROBLEM
Finding F112 (5 amp slo-blo) fuse
blown. This fuse is located on the
Power Driver board. Replacing
the fuse, you find that the circuit
holds, only to come back to find it
blown a week or two later.
According to the service manual,
the error codes in self-test for this
machine are of the "9x" variety.
The only reason we could find for
these error codes seems to be that
the rear (back or bottom) title
holder seems to stick against the
back of the stack of holders as is
slides through the back ( or bot-
tom) transfer slot.
OSCILLOSCOPES
609/662-1080
OR FAX
CAUSE
The factory has mislabeled and
installed the wrong size fuse. It
should be a 7 amp slo-blo.
SOLUTION
I found this problem after install-
ing several fuses and finally run-
ning an amperage check on that
line. I found that it would draw
close to 5 amps during Multi-Ball
play.
I thought this might be a close
tolerance and called the factory
on it. My suspicions were con-
firmed. When more than two flip-
pers are used a 5 amp fuse is
inadequate, the fuse rating
needed to protect this line should
be a ·7 amp slo-blo. Mark your
game.
BOTOOM LINE
When in doubt, call the factory
customer service technicians.
Unfortunately, there is little you
can do to prevent the occasional
jam, but there are a few tricks you
can employ.
FIRST
• The mechanism requires some
type oflubrication. When remov-
ing the title cards, stack them
like a deck of cards and tilt the
stack slightly to expose the slider
tongues of the cards. Carefully
apply Armor-All (or similar prod-
uct) to the exposed tongue area.
Use this sparingly so that it does
not seep into the title strips them-
selves.
• Next, we apply Amor-All to ex-
posed interior top button and to
the sides of the transfer casing.
• Reinstall the title strips.
609 /662-0537
You should now notice an imme-
diate improvement in speed and
smoothness of overall operation.
SECOND
When moving the Juke, the~
weight of the cards can cause the
bottom card to dislodge into the
transfer slot. Care for this is quite
simple.
• Before moving the Juke, oper-
ate the title transfer button while
holding onto the clutched drive
motor shaft.
• Stop the shaft when the top
card is halfway across the deck by
hand and unplug the main cable.
With the top and bottom transfer
slots occupied, the stacks won't
move.
Simplyplugthe title holder board
cable back in before restoring
power at the new location. In our
opinion, NSM should hav~ pro-
vided this function.

Download Page 3: PDF File | Image

Download Page 4 PDF File | Image

Future scanning projects are planned by the International Arcade Museum Library (IAML).

Pro Tip: You can flip pages on the issue easily by using the left and right arrow keys on your keyboard.