(
.· MayJ991
Shaft/Anti-Cheat Assembly. Make sure to keep roller
flanges outside of the Lower Shaft/ Anti-Cheat As-
sembly rollers. The Anti-Cheat Lever should spring
back when pushed, iftheTorsionSpringishooked up
correctly.
c) Now slip the belts over the lower half of the
Magnetic Head Assembly and in keeping with note 3
above, remount Magnetic Head Assembly. The belts
go under the top half of Magnetic Head Assembly.
d) Remount Rear Roller Shaft, being careful not to
pinch belts, and keep the belts straight.
e) Slip the belts over the Input Shaft, be careful not to
drop the bushings. At this point, make sure the belts
are straight (note 2 above) and move freely. Rotate the
large white gear on the side of the BT, to check for
proper rotation of the Upper Belts.
f) Put on Wire Retaining Clip, then put on the Central
Roller Spring, Nut and tighten. Put Wire Spring back
on the tighten Casting Screws (be sure not to pinch
optic wires with Wire Spring).
g) Replace Top Cover with Pivot Screws (with spacers
on them). Hook up and test BT.
►
ELECTRONIC BULLETIN BOARD
LOGON S*TJ's BBS!
The only full-time BBS dedicated to the Coin-Op
Industry. STAR*1ECH Journal offers this service~
to all subscribers. All you need is a computer and a
modem to access this exciting new service.
If you are interested, you may contact the board 24
hours a day at: 404/631-2928 (2400/1200/300
baud, 8 data bits, 1 stop bit, no parity).
After the system connects, just follow the prompts.
You can leave any questions or special requests in a
message to STAR*TECH Journal or to the Sysop
when you log off.
VOLUMES/ISSUES
Now, have all the information you need when servicing this
Industry's specialized electronic systems.COMPLETE
VOLUMES @ $42 . SINGLE ISSUES @ $5 (Vol. 12 only).
Send self-addressed stamped ($0.85) envelope (9"xl2") for
complete index of all articles covered since March 1979.
#1
#2
#3
#4
#5
SOLD OUT
#6/7 SOLD OUT
Lower Shaft/Anti-Cheat Ass.
#8 SOLD OUT
#9 SOLD OUT
# 10
#11
#12
Flanges Outside
Of Rollers
~) Spring
Here
(Mar79-Feb80), 12 iss/144 pp.
(Mar80 -Feb81). 12 iss/144 pp.
(Mar81 -Feb82). 12 iss/188 pp.
(Mar82 -Feb83). 12 iss/256 pp.
(Mar83 -Feb84). 12 i ss/327 pp.
(Mar84/Dec84 -
Jun85/Feb86). 17 iss/270 pp.
(Mar86-Feb87), 12 iss/ 142 pp.
(Mar87-Feb88). 12 iss/208 pp.
(Mar88-Feb89). 12 iss/296 pp.
(Mar89-Feb90), 12 iss/288 pp .
{Mar90-Feb91), 12 iss/288 pp.
------------------
BACK VOLUME ORDER FORM
I
I
I Please send the Volumes (@ $42) indicated:
I
0 Volume 1
□ Volume 2
0 Volume 3
I
□ Volume 4
0 Volume 10
0 Volume 11
I
0 Volume 12
Complete Your Technical Library Now!
Company:
Attention:
Address:
Output Shaft
Figure 3
City/State/Zip: _ _ _ _ _ _ _ _ _ _ _ _ _
0 Payment Enclosed
NEXT MONTH
I'll talk about some common problems and how to
identify them, along with proven repair procedures.
($3.50 S/H, $11 AIR)
0 COD
Mail coupon to STAR*TECH Journal, PO Box 1065,
Merchantville, NJ 08109. Phone: 609/662-1080.
L------------------J