Star Tech Journal

Issue: 1983-August - Vol 5 Issue 6

3
STAR*TECH JOURNAL/AUGUST 1983
NEWS BITS/
SIAR.1{
IECH
JOU
The Technical Monthly
for the Amusements Industry
P.O. Box 1 065
Merchantville, NJ 08109
609/662-3432
AUGUST 1983
VOLUME 5, NO. 6
Publisher/Editor
James Galore
Administrative Assistant
LT. DiRenzo
Art/ Advertising Coordinator
Paul Ehlinger
Circulation Promotion
Linda Geseking
Layout
Dale Meloni Graphics
Contributing
Technical Writers
Todd Erickson
Don Becker
Mark "Bear'' Attebery
Julius Robins Ill
Mario Hudson
Frank Becker
Peter Gurko
STARHECH JOURNAL, August
1983, Vol. 5, No. 6. Copyright 1983
by Star.rech Journal, Inc. All rights
reserved. Star•Tech Journal is
published monthly. Address inquiries
to: P.O. Box 1065, Merchantville,
NJ 081 09. Phone: 609/662-3432.
Subscription rates: USA-$40.00.
Canada-$45.00. Other countries-
$70.00. Please remit payment in
US funds. Advertising rates avail-
able upon request. All manuscripts
become property of Star•Tech
Journal. No part of th is Journal may
be reproduced without permission.
Contents of the articles herein are
verified as much as possible.
However, any reader using this in-
formation does so at his/her own
risk. Star•Tech Journal accepts no
responsibility for its advertisers'
activities.
DOWNLOADING VIDEO SOFTWARE
ICs SOON TO BECOME CENTIPEDES
Downloadlng Video Software
The downloading of video software, or "tele-
distribution", is the subject of a 217-page
report from International Resource Develop-
ment Inc., a market research firm based in
Norwalk, CT. The market for teledelivery of
video software will soon be one of the fastest-
growing teledistribution markets. By 199 3,
IRD estimates that video teledelivery revenues
of$3.8 billion will surpass retail revenues from
sales and rentals of videocassettes, the latter
amounting to only $3 billion. By that time there
will be 16 million consumers regularly down-
loading movies, TV shows, special events,
educational programming, games and musical
videos.
Cable On The Defense
Interestingly enough, cable is not likely to
participate in the move to teledelivery of video
software, says IRD. In fact, the report predicts
that video teledistribution, marketed on a
subscription basis, will become a strong
competitor to cable movie channels and pay
TV systems. Consumers are likely to discover
in video teledistribution a convenient way to
bring video products into their homes in such a
way that they can view these products at their
leisure rather than according to the schedules
of broadcast network or cable movie channel
programmers.
Video teledelivery promises to be substan-
tially more lucrative than music or games
teledistribution, according to the report.
Teledelivered Games By The Wayside?
The downloading of videogames, which has
gotten off to a slow start on cable (PlayCable
and the Games Network) and which will see a
new evolution with the introduction of
GameLine (downloaded over phone lines),
may not get much further, according to the
report. "The arrival of TV-quality videogames
could severely impinge upon the future of
current downloading ventures because
enhanced videogames will not be teledeliverable,
at least not until the late 1980s or early 1990s.
Should enhanced, TV-quality games become
the next videogame craze, demand for down-
loading current video and computer games
could go by the wayside as consumers spend
their discretionary dollars on low end, interactive
videodisc players and software," observes the
report.
ICs Soon To Become Centipedes
New York, New York: Electronics magazine
reports that National Semiconductor Corpora-
tion is developing a surface-mount IC package
that is expected to eventually lead to a I" x 1"
package having 224 leads.
The new package, called Tape-Pak, will
employ what National Semiconductor calls a
tape automated bonding system. Few details
about this packaging are available, but lead
spacing may be as close as 12.5 mils. Con-
ventional !Cs have lead spacing of 100 mils.
Currently an 84-lead package, 21 leads per
side, is being shown to National' s customers.
An obvious advantage of the package is it
provides for a very high packing density. Also,
since the internal leads are very short, delay
time is extremely small. An added advantage
of the Tape-Pak design is reduced cost These
packages may be available by the end of the
year.
Note: Smaller parts will enable manufac-
turers to add more features to their products
without increasing size. Consumer products
will become more complex as customers come
to demand more and more features.
New demands will be placed on test equip-
ment and technicians. A good knowledge of
solid state devices, plus the equipment to work
on it, will be more important than ever before.
000
ARMOR CHAJN COMPANY
ANNOUNCES NEW ANTI-THEFT ANCHOR
FOR VENDING MACHINES, ELECTRONIC GAMES AND MOTEL TV SETS
Armor Chain Company has developed an
anti-theft maximum security system built
for the ultimate in protection. This new
(patent pending) anti-theft Armor Anchor
(7 ¾" x 7¾") made of carburized steel,
with a zinc blue chromate finish, is easily
installed by just drilling a hole in the side or
bottom of the machine and attaching a
chain and lock. Machines can be easily
connected to each other to stop theft. The
anti-theft Armor Anchor retails for $10. 95 .
The 30" carburized chain with I½" x I" links retails for $10.95 . Other sizes available on
request.
The 4" x 4" anti-theft Armor Anchor is available for TV sets.
Special distributor prices offered. Distributorships available.
Manufactured by Armor Chain Company, 3240 West 117th Street, Cleveland, Ohio 44111.
Phone: 216/252-8126 .
4
STAR*TECH JOURNAL/AUGUST 1983
* VARISTOR PROTECTION
* SEGA'S STAR TREK KIT
NEW-TONE ELECTRONICS , INC.
* TAITO RECTIFIER HEAT SINKS
* WILLIAMS NEW PLASTIC CABINETS
QUALITY REPLACEMENT
SEMICONDUCTORS
AVAILABLE FOR THE
ELECTRONIC GAMES
INDUSTRY,
By Todd Erickson, Summit Amusement, St Paul, MN
Varistor Protection
INCLUDING THE FOLLOWING
MANUFACTURERS,
• ATARI
• BALLY
• CINEMATRONICS
• EXIDY
• GOTTLIEB
• SEGA/
GREMLIN
• MIDWAY
• STERN
• WILLIAMS
AVAILABLE FROM YOUR LOCAL
NTE DISTRIBUTOR
Rush me a FREE Electronic Games
cross reference Gulde #CR10
COMPANY NAME
YOUR NAME
TITLE
ADDRESS
-
CITY
STATE
ZIP CODE
PHONE NO.
CLIP AND MAIL TODAY TO :
NEW-TONE ELECTRONICS, INC.
DEPT. G1 / 44 FARRAND STREET
BLOOMFIELD, NEW JERSEY 07003
WE
REPAIR
EVERYTHING
FAST!
Board
Specialists
Video Games
Domestic & Foreign
Technicians
formerly with Bally
Send your
repair work to:
REPAIRS
UNLIMITED
119 Robin Road
Altamonte Springs, FL 32701
(305) 339-6601
-
This spring we have had a lot of thunder storms here in Minnesota. During one of these
storms, six of my games went out of order. Of these six games, three of them were Boom
Balls by Meltec. Another interesting point is that no Williams' games were damaged.
Most of my other games and my Williams games have one thing in common: a 130-volt
varistor is wired into the incoming 11 0v line after the fuse. The generic number is
D130LA10A. They are available from Wico and most electronic parts houses. The
varistor provides protection against high voltage transients ( surges produced by
lightening, motors, fluorescent bulbs, etc.). These units are extremely valuable if there
is any question as to the reliability of the 110-volt source. Because I lost all of my Boom
Balls, I strongly recommend installing varistors on these units. They are installed
across the 110-volt line after the fuse. It acts like a pair of zener diodes clipping any high
voltage spikes. If the spike is very large, the varistor will blow the fuse.
A few years ago, at one of my locations, something went wrong with the power. The
music amplifier belonging to the band cost over $200 to repair. I had only ruined a
circuit breaker and cooked the varistor on a jukebox. Needless to say, my repair was
well under $200.
Saga's Star Trek Kit
Sega has just released their new Star Trek Kit. It will sell for about the same price as
other kits, except it will include a new color X-Y monitor. It consists of a complete game
minus cabinet and coin door. This will enable the operator to take old black and white
games and make them into new color Star Trek games. I feel this is the best buy in kits
today. I will follow next month with more on the subject
Talto Rectifier Heat Sinks
Adding the small heat sinks for the bridge rectifiers supplied by T aito turned out to be a
disaster. They don't do the job. Taito has a new 3-inch long one they claim works, but I
have bolted the bridge rectifier to the cash box cavity and hard wired the bridge to the
power supply board.
Two additional tips I received from Taito: 1. When replacing the bridge, also
replace the diode across it; and 2. Make sure there are no cold-soldered joints on the
fuse holder.
WIiiiams New Plastic Cabinets
Last week, I picked up my new Williams upright Sin is tar. This unit has the new plastic
cabinet Williams told me to give it some abuse. For starters, I decided not to tie it up in
the back of the truck. Over it went. As I picked it up, I noticed it was still in one piece. I
tried kicking it as hard as I could and hitting it with a hammer. Again, no damage was
delivered. The top plex is made of Lexan. Lexan is also known as bullet-proof plastic.
I own a video game called Computer Space that was made in 1970 by Nutting &
Associates. It is made of fiberglass and is still in perfect shape. My sit down Night
Driver by Atari is over 5 years old and still looks like new. Williams Sinistar is far
superior to these older fiberglass products and is made of high-impact plastic. If it
should be dented, a heat gun will repair the damage. A cut can be welded using a
soldering iron. Williams, I feel, overbuilt this cabinet. I would rather see a
manufacturer overbuild than underbuild a new cabinet like this. It weights about 25
lbs., less than a comparable wooden cabinet. The cabinet has an inner and outer shell.
The game is made in two halves that are welded down the middle. This will allow them
to change the upper front half and radically change the styling of the game. The coin
area has a metal surrounding to product the coin box. I feel they should have made a lip
around the key area to make it extremely difficult to pry open with a screwdriver. The
sides should have some artwork also.
As Williams gets a better feel for this, I feel they will be able to cut another 25 lbs.
from the game. This will make the game much more comfortable to move and cheaper
to ship when new. This will also be the first of many plastic cabinets.
The California-based manufacturers, where good plywood is at a premium, would
be wise to look at this. The press-board cabinets are much heavier and damage much
easier than plywood. Williams makes excellent plywood cabinets now. Their plastic
cabinet, I feel, is far superior to the wooden cabinets produced today. I feel they will be
the trend of the future. Another first f?r Williams' engineering!
***

Download Page 3: PDF File | Image

Download Page 4 PDF File | Image

Future scanning projects are planned by the International Arcade Museum Library (IAML).

Pro Tip: You can flip pages on the issue easily by using the left and right arrow keys on your keyboard.