STARHECH JOURNAL/MAY 1982
5
WILLIAMS
"HYPER BALL"
"DEFENDER 11
BALL LIFT MOTOR KIT
CONTROL
PANEL
CONTROL PANEL ALIGNMENT
•ALUMINUM•
Won't burn or melt
Colors won•t wear off
PRICES
l 1 •5pcs•2500,.
11
9
6 1 •10pcs·2200,.
or More - 2000 ..
*
*
-fl::BURG
GLASS PARTS
Unbreakable Lexan·
497723-USCl "Bandshell" SIB ea.
!COIN CREDIT WINDOW)
•MANY OTHERS• QTY. DISCOUNTS
( REPLACE IUINERAIIE PARTS)
NOT ENTIRE ■ AC HINES
*
ALSO
VIDEO ARCADE
TEE-SHIRTS
I· 317-848-2033
MBCC 2225 Yandes, lndpls, IN 46205
AM.QA
School for
Coin Machine
Technicians
The only school that comes
to you! Don Miller travels
with his school and
conducts his courses on
video & pinball machines
wherever sponsored by the
A.M.O.A. or state
associations. For further
information contact the
Amusement & Music
Operators Association at
312-726-2810 or Don
Miller at 303-686-7801.
0
AUGER MOTOR KIT
Williams has made available a kit to
improve the performance of the Ball Lift
Motor Assembly on "Hyperball".
On games with serial numbers prior
to #500168 with weak auger motor
symptoms ( motor will not tum while ball
is in the bottom of the assembly and when
the balls are removed, the motor turns
slowly) the kit (K-509-2) will cure these
related motor problems.
The kit consists of
1. A heavy-duty replacement motor
2. An updated power switching
board with larger heat sinks
3. A revision "A" transformer
These kits are available through
Williams' distributors. Contact them for
availability.
CONTROL PANEL ALIGNMENT
Care and caution must be taken when
replacing the control panel on" Hyperball".
The Ball Shooter Assembly must be free
after replacing the panel and care must be
taken to align the panel before power is
applied.
Failure to align the control panel
properly will result in damaging the coil
when power is applied.
Because of the nature of "Hyper-
ball" the shooter assembly cannot be
covered. (This would generate too much
damaging heat.) As a precaution after
replacing the front molding and before
turning on the power, check to see that the
shooter assembly is free.
ANNUAL
IBCHNICIANS
CONVENTION
TOBE HEID IN
AMES,IOWA
The Electronics Technicians Association,
International, Inc. will conduct its 4th
annual convention at Iowa State University
for the third year in a row.
Site for the meetings will be the
Student Union Building on the ISU
campus in Ames.
Dates for the meetings will be July
15 through July 17. An officers meeting
will kick off the convention on Thursday
evening with Chairman George Savage,
CET, presiding. Other events include
Technician Troubleshooting Seminars;
Business Training; Personal Development
and Employment Clinics; Technician of
the Year Awards Banquet, and more.
Any electronics technician may attend.
Contact Convention Chairman: Ron Crow,
CET, P.O. Box 1058, Ames, Iowa 50010.
Phone: 515-294-5060.
NEWGAME
DEVELOPMENT
we'll help you
TURN YOUR
IDEAS
INTO
NEW GAMES
PROGRAM
AUfOMATION,
INC.
385 Main Street
Suite Number 2
Metuchen, NJ 08840
201 /494/3330
Strong,
Reliabl
Joysticks
9
•
(j
e Will fit in Upright
'
and Cocktail Tables
• We ship from stock
Newport
Model 125
Made in the U.S.A. for the
needs of the American Market.
Will replace joysticks in im-
ported and domestic machines.
Interchangeable gateplate for
two, four or eight positions.
Engineered and built to last!
All parts easily replaceable.
FAST SERVICE.
Ideal For
PAC•MAN Games
Joysticks ordered at A.M.O.A.
should be reordered direct from
us.
CALL TODAY
SATISFACTION
GUARANTEED
Newport Machine Design
P.O. Box 418
Bishop, CA 93514, U.S.A.
(714) 873-4431