GREMLIN
"ASTRO BLASTER"
AUDIO MODIFICATION
S*T J July 1981 5
VOLUME CONTROL CONNECTOR
ON POWER SUPPLY
0000
It has been found that in some areas
where there is a number of outside
communication systems, audio inter-
ference may occur in the Astro Blaster
games. If you are experiencing this prob-
lem in some areas the following pro-
cedure will eliminate this interference.
Turn off the game and locate the
4-pin power amp input connector on
the power supply. Strip off approxi-
mately 1 /2 inch of the gray insulation
from the connector lead. Be careful not
to strip away the foil underneath. Con-
nect the stripped end of a wire jumper
by wrapping it around the exposed foil.
Put the other end of the jumper in the
slot 4 then plug it back or. the power
supply. For best results refer to the
diagram below. If you have any ques-
tions, please call Gemlin/Sega Customer
Service, (800) 854-1098.
I
SOLDER
GRAY
, _ _ _ _ INSULATION
GRDUND---- 1
LEAD
JUMPER
WHITE
- - ~ - WIRE
4
3
2
00000000000000000000000000
Americade Amusement, Inc.•
2009 Old Cuthbert Road, Cherry Hill, NJ 08034
609-428-3869