Star Tech Journal

Issue: 1981-July - Vol 3 Issue 5

S*T J July 1981 4
Rowe 447 Product Price Upgrading
Several options are available to extend the product sale price capability of older 447 All-Purpose Merchandisers
to $1.50 or above. The options available depend on the particular model.
447 EGUIPPED W/COIN MECH. SLIDE PANEL
1. Rowe $1 .50 Coin Mech. (with or without changer) can replace existing Coin Mechanism.
PART NO.
449-1275
449-1300
DESCRIPTION
Rowe Coin Mech. (w/changer)
Rowe Coin Mech. (w/o changer)
LIST PRICE
425.00
363.55
2. A kit is available to convert existing $1 .00 Rowe non-changer mechanism to $1 .50.
PART NO.
DESCRIPTION
LIST PRICE
133-6025
$1.50 Non-changer Coin Mechanism
Conversion Kit
113.89
3. 10-Price Conversion Kits are available to adapt machines for use with N RI or Mars 10-Price Coin
Mechanisms.
PART NO.
DESCRIPTION
LIST PRICE
447-6041
10 Price Conversion Kit
(for 447 w/single interlock switch)
10 Price Conversion Kit
(for 447 w/two interlock switches)
*400.00
447-6042
*400.00
*Does not include Coin Mechanism
4. A new Slide Panel is necessary to adapt machines for use with Coinco M-300 ($3.15) Coin Mechanism.
PART NO.
447-1644
447-21560
DESCRIPTION
Slide Panel Assembly
Coin Return Lever Rivet Assembly
LIST PRICE
*450.00
3.15
*Does not include Coin Mechanism.
EARLIER 447 (W/O COIN MECH. SLIDE PANEL) AND 147
1. The Rowe $1.50 Coin Mechs. can be used in conjunction with Adapter Kit.
PART NO.
447-6012
DESCRIPTION
All Purpose U.L. Coin Mechanism
Adapter Cable Kit
LIST PRICE
39.09
2. The Rowe $1.50 non-changer Conversion Kit is applicable.
PART NO.
DESCRIPTION
LIST PRICE
133-6025
$1.50 Non-changer Coin Mechanism
Conversion Kit
113.89
3. Other kits are available from the coin mechanism manufacturers for conversion (product price. upgrading)
using their respective mechanisms.
GREMLIN
"ASTRO BLASTER"
AUDIO MODIFICATION
S*T J July 1981 5
VOLUME CONTROL CONNECTOR
ON POWER SUPPLY
0000
It has been found that in some areas
where there is a number of outside
communication systems, audio inter-
ference may occur in the Astro Blaster
games. If you are experiencing this prob-
lem in some areas the following pro-
cedure will eliminate this interference.
Turn off the game and locate the
4-pin power amp input connector on
the power supply. Strip off approxi-
mately 1 /2 inch of the gray insulation
from the connector lead. Be careful not
to strip away the foil underneath. Con-
nect the stripped end of a wire jumper
by wrapping it around the exposed foil.
Put the other end of the jumper in the
slot 4 then plug it back or. the power
supply. For best results refer to the
diagram below. If you have any ques-
tions, please call Gemlin/Sega Customer
Service, (800) 854-1098.
I
SOLDER
GRAY
, _ _ _ _ INSULATION
GRDUND---- 1
LEAD
JUMPER
WHITE
- - ~ - WIRE
4
3
2
00000000000000000000000000
Americade Amusement, Inc.•
2009 Old Cuthbert Road, Cherry Hill, NJ 08034
609-428-3869

Download Page 4: PDF File | Image

Download Page 5 PDF File | Image

Future scanning projects are planned by the International Arcade Museum Library (IAML).

Pro Tip: You can flip pages on the issue easily by using the left and right arrow keys on your keyboard.