Play Meter

Issue: 1982 December 01 - Vol 8 Num 23

c
K'S
KS
Dy
Fronk
Sen in sky
6ravitar: it may be
'a very reliable game'
tari's latest release, Gravitar , is
what I would call a combina-
tion of Lunar Lander and
Space Duel.
It seems like I just reviewed Atari's
Kangaroo only a few weeks ago, and
here is still another Atari game . We all
feel that too much equipment is flood-
ing the market, and the bubble will
burst shortly-if it has not already.
The Gravitar cabinet is very similar
to the type used on Kangaroo, Centi-
pede, Dig Dug, etc. The front section,
below the control panel, is painted
black . This color and type of paint has
stood up extremely well to the frequent
kicking video games receive . The cabi-
net's sides are painted a glossy white
and are covered with brightly colored
decals . These side decals adhere to
Atari games very well. Even on games
a few years old, the sides can be cleaned
and the decals look attractive . Atari
has this aspect down well.
Gravitar utilizes the Coin Control s
Inc. two-door system (over I under)
with a separate cashbox area located
under the coin door. As promised,
Coin Controls has put a key hook on
the inside of the coin door. We all
appreciate this very much.
Atari has cut two key notches into
the sides of the utility panel which is
mounted to the top back of the coin
box frame. These notches can be used
to hold the back door ke ys and I or coin
box door keys, but I would recom-
mend using the hook instead. The
reason is that the keys can fall out of
the notches if the game is tilted back
far enough or gets a severe jostle.
Searching for keys in the bottom of a
A
64
cabinet and not finding them wastes
valuable time.
Speaker grills have been rivoted to
the cabinet over the two speakers, one
mounted over the coin door and the
other under the marquee or attraction
glass overhang. These grills are much
stronger than those used on most
games but can be bent from the edges.
Shielded high
fidelity speakers
with magnets
give the game
better sound
quality overall.
Thicker, stronger metal
The heat vent grill on top of the
game is made of thicker metal and is
much stronger than the speaker grills.
The speakers in Gravitar are newly
improved. Shielded high fidelity
speakers with shielded magnets give
the game better sound quality overall.
The marquee or attraction panel is
made of tempered glass. This has
worked better than plastic, evident by
the infrequency that Atari marquees
have to be replaced . The marquee can
withstand a mild punch (I don't recom-
mend hitting it.) and is held in place
with two sturdy metal guide brackets
(top and bottom). The guide rails are
not easily bent with your fingertips , so
chances are that the marquee will stay
in place. Atari has secured the guides
to the cabinet with special Allen
wrench screws .
A section of foam tape is on the top
and bottom front edges of the marquee
to cushion the edges from the metal
brackets. This is a good idea.
The PCB logic board and the regu-
lator audio board are located on the
right side wall of the cabinet, looking
from the back door. The power supply
is located on the cabinet floor. This is
the same setup as in past Atari games .
It may be helpful to know that the
fuses on the new Atari power supply
are of different amperage than many
technicians are used to having. The:
power supply uses one 20-amp slo-blo
fuse, four 4-amp slo-blo fuses,and one
7-amp slo-blo fuse .
The monitor is a Wells-Gardner
Quadrascan XY color. This is the same
monitor that was used on Tempest
that frequently gets overloaded and
blows diods, transistors, and caps.
Atari put a monitor protection board
on its Space Duel to shut down the
game when the board locks up . I didn't
see any protection board on Gravitar,
so let's hope that your board doesn't
lockup.
The monitor is bolted to the cabinet
in front with four bolts. In the back, on
PlAY METER. December 1, 1982
,
----
the right sid e, the mo nitor chasis is
held in place with a metal L-bracket.
The whole wood en shelf holding up
the monitor has been elim in ated. The
L-bracket should be enough to keep
the monitor in place.
Tempered glass
The monitor display glass is a lso
tempered and held in place at the
bottom edge by a retaining clip and
the control panel edge . Once the con-
trol panel is open, the retaining cl ip
must be slid to the right and removed
through the wooden cutout. Then the
monitor glass can be easi ly removed.
The control panel is designed slightly
different from the panels we've seen in
the past. The top of the panel curves
upward and covers the bottom inch of
the monitor cover. Two latches secure
the panel from the top sect ion to the
cabinet frame in a horizontal position.
The panel is held in place and cannot
be easily pried off.
The top edge , however, can be bent
slightly outward, and this is the
weakest section where damage may
occur. When unlatched. the panel
pulls forward on a hinge and opens so
that the wiring and switches are almost
horizontal. In this position, they are
easy to work on . The overlay decal is
wrapped over the top edge of the panel
so it can't easily be peeled off. This
overlay looks like it will last. It's sup-
posed to be burn resistant. The Centi-
pede decal overlays held up except that
many of them cracked and pealed
around the ball control area circle.
Atari has also placed foam tape on
the display shield glass to act as a
cushion between the control panel
edge and the display shie ld a nd also to
prevent liquid from getting between
these two sections and down into the
cabinet. There are five buttons: left
and right rotate, thrust, fire, a:1d
tractor / shield, with cross-hair leaf
switches and two led switch buttons
(first and second player start).
These buttons and switche s are
relatively trouble free . It's wise to
always check the ground strap attached
to the panel latch tabs to make sure it is
attached tightly. This will decrease the
chances of players receiving shocks
while playing the game.
The Operator Inform a ti on Display
and the Self Test features o n Gravitar
should be of interest to many
operators. Atari recommends waiti ng
at least 10 seconds after a game has
PLAY METEP.. December 1, 1982
--
HOME STUDY ELECTRONIC COURSE
NOW AVAILABLE
I
t
I
t
' '
'
'
'
t
'
t
Electronic Institute of Brooklyn announces Its complete classroom course for tho Video Game Repair
Industry is now available on video tape for homo study. This Includes all material necessary for
hands·on troubleshooting work. If you're worried about not having a V.T.R., we'll rent you one for the
length of the course.
I
Also available to home study students Is a free Hot line to tho Instructor.
Our course covers the following
Course Description:
1. Basic Electronic Theory
2. Tn Logic
J. Power Supply !Theory & Repalrl
4. Monitor Theory & Repair IB&W, X·Y, Color)
5. Using a digital meter
6.
7.
8.
9.
10.
11.
Using a Logic Probe
Soldering techniques on double sided boards
Microprocessor and memory theory
Electronic Pinball troubleshooting and repair
VIdeo Game troubleshooting and repair
Reading & Understanding Schematics
I
~
For more information, call collect
(in NY State) 212/377-0369
(out of State) call Toll Free: 1-800-221-0834
or write
t
I
I
I
I
...
100% Satisfaction Guaranteed
ELECTRONIC INSTITUTE OF BROOKLYN
4801 Avenue N (corner E. 41th St.J, Brooklyn, NY 11234
-
-----
PEfiCHSffi IE
Distributing Co.
For 31 years The Dependable Supplier to the Coin Machine Industry,
with Quality Parts and Supplies at the Lowest Possible Prices. For •••
• VIDEO ••• • INTEGRATED CIRCUITS ••• • PHONOGRAPH
• AMUSEMENT GAMES • • • • SOCCER & POOL TABLES
• ELECTRONIC SUPPLIES ••• • VENDING MACHINES
'We Guarantee Satisfactory Service"
PARTS CATALOG AVAILABLE UPON REQUEST.
PARTS DIVISION ••• 1040
Boulevard S.E.
Atlanta, Georgia 30312
Phone 404-622-4401
65

Download Page 64: PDF File | Image

Download Page 65 PDF File | Image

Future scanning projects are planned by the International Arcade Museum Library (IAML).

Pro Tip: You can flip pages on the issue easily by using the left and right arrow keys on your keyboard.