Coin Slot

Issue: 1982 March 085

Coin Slot Magazine - #085 - 1982 - March [International Arcade Museum]
Letters To The
EDITOR
Dear Editor,
I tend to agree with most of Dave Evans' observations in his
last two book reviews. It's quite obvious that Reddock's book is
directed at the beginner, which is good. I question the wisdom of
having commercial advertising included And on the last page is
my pet peeve again; a coupon that will destroy a part of the book.
I'm reluctant to cut a magazine and refuse to do it to a book.
While I might be interested in the newsletter, the coupon won't
be used. One other comment about the grading criteria; there is
no such thing as unacceptable. Undesirable, yes, unacceptable
no. I'll take all I can get if the price is right The guide by Jerry
Ayliffe was of greater interest Probably because I have little
information on anything but slots. I also noted an error, on page
220 the description of the Challenger Duck Shoot states that a
ball bearing is dropped into the gun and shot. Not so. The penny
itself is shot at the ducks. (Unless his machine is different than
mine.) It also dispenses a gumball (if the handle is pulled) with
each shot, regardless ofyour accuracy. A miss gets one as well as
balls gives a walk, runners progress on the bases and runs are
tallied. The infield rotates each time there's a hit, with a cam that
provides for doubles, triples and homeruns periodically. The
instruction sheet offers three outs for 1$. (This was changed; it
originally read three outs for 5$ but the coin mech was changed
to It and the card scratched out and changed to It.) The
instructions go on to say that the game is over whenever there is
three outs or there are 15 balls on the playing field. (In which
case there wouldn't be any left to play with.) It would be
possible, but highly unlikely that all 15 could end up on the field
My only complaint about the machine is that the pot metal parts
are near impossible to repair and very difficult to reproduce. But
it has been done and the machine works great The digger is very
interesting and poses a number of questions. It's manufactured
by the Scientific Machine Corporation, Brooklyn, New York.
a hit
The enclosed pictures: The pinball might be of interest to Dick
if he doesn't have information on it It's manufactured by
com
.
m
:
u
from -muse
d
e
e
load .arcad
n
w
Do //www
:
http
Rockola and is all mechanical. It's ingenious! Just about every
theory. It's 5C operation; the crank cycles completely by
aspect of the game is included; three strikes registers an out, four
continuous turning to the right, ending with the crane fully up and
4 —THE COIN SLOT
© The International Arcade Museum
It's serial numbered (2661). It appears to have been cut out of a
bank ofmachines since there is not any type ofcase. The "prize"
chute is quite small which makes me think it may have been a
confection dispenser rather than a game of skill. The verticle
columns at each side of the crane appear to be chutes that could
have been used to replenish the supply, which reinforces that
March, 1982
http://www.arcade-museum.com/
Coin Slot Magazine - #085 - 1982 - March [International Arcade Museum]
above the center opening. Some control of the movement is
possible with the lever at the top left of the panel. The two
vertical columns are decorated with old time sailing ships. This
machine works well except that the bucket is missing. I'd be very
interested in hearing from someone that could give some
information on the machine. My comments are pure speculation.
One other thing: most of the paint and some of the metal seems to
have been exposed to something quite strong— possibly salt.
Enough for this time.
Sincerely.
And, yes, the Rock-Ola WORLD'S SERIES will have a
place ofhonor in thefirst volume of" 100 Pinballs," Look for it
around the middle of the year.
Now, an even more interesting machine, and that's that
Scientific Machine Corp. PANAMA DIGGER. You're abso
lutely right; the machine was made for a bank of machines.
How do we know? We checked the experts again, this time
Steve Gronowski and Dick Bueschel who are working together
on a "100 Most Collectible Arcade Machines" book. It'llbe out
sometime after the pinball book, hopefully the latter part ofthe
Jim Peck
year.
Dear Jim,
Anyway, what they tell us is that Scientific Machine
Corporation, located in Brooklyn, was quite an outfit They
gained prominence in the early 1930s when pinballs came in
flower and made a number of interesting pinball games. They
also kept to the east for the most part, and got involved in
It's always great to get lettersfrom you. They 're so interesting.
Your comments are great And,., this time we can even offer
some answers.
You're absolutely right about the Rock-Ola WORLD'S
SERIES pinball of 1933, It'sfar more than just interesting. It
is truly ingenious. We checked with Dick Bueschel to see if he
had this data for his upcoming "An Illustrated Price Guide to
the 100 Most Collectible Pinball Machines, Volume I." He not
only does, he tells us that while the selection of the 100 top
banked, specialty and arcade locations. One of their greatest
efforts was the bar in the "Flying Trapeze" bar and restaurant on
West 57th Street in New York City at the end of 1934. They
built-in 25 of their SAFETY ZONE pinball games as the bar
and serving counter. The patrons could play as they ate and
drank. Wow! What a find that installation would be. We don't
pinball games variesfrom one collector to another (what Dick
know where the "Flying Trapeze" was, but a check ofthe New
York City Directory (in the New York Public Library)for 1935
has donefor the book is get the "Top 100" listsfrom a number
will show you ifyou're interested.
ofexperts, with the books reflecting their selections, and why)
Scientific went on to make what they called "Built-in
Games" until World War 2, and then came back after the war
with an arcade machine called the POKERINO that had a
the Rock-Ola WORLD'S SERIES is onjust about everybody's
"Top 100" list That's pretty darn good for a pinball game
made in 1933 — or almostfifty years ago — that virtually no
collector today remembers on location.
post- war vogue in bars across the country until the shuffieboard
Continued on page 6
1.
2.
3.
4.
25$ Mills WAR EAGLE-$1,600
12
10$ Mills FUTURITY-$2,500
Jennings 5$/25 5 25$ Jennings SUN CHIEFS—$1,200 each
13
14
15
6.
Quantity of 2 25$ JenningsSTANDARDCHIEFS
17
Double Pace 5$/5$-$1,350
5$ Watling FANCY FRONT Twin Jackpots—
7.
Quantity of 5 25$ Jennings SUN CHIEFS TIC
18
$1,200
10$ Pace BANTAM missing Jackpot—$795
Restored early Ironclaw Digger—$1,250
5. 5$ Jennings STANDARD CHIEF-$1,150
—$1,200 each
TAC TOE, fully restored—$1,500 each
8. 50$ Mills HI-TOP-S1,150
9. 5$ Jennings 4 STAR CHIEF-S1,150
10. 2,5$ Mills Mint Vendor, FOK—$1,300
16!
-j 9'
20
21
22
25$ Buckley-$ 1,200
10$ Mills CHERRY FRONT-$1,075
5$ Mills CHERRY FRONT-$1,075
1$ Restored LITTLE DUKE-$1,800
Mills 5$ SILENT FOK-$1,250
Solid oak Naked Lady slot stand—$300 each
Floor Model Exhibit Supply Digger—$975
.com
m
:
u
se
u slot
from -m
d
All
machines in good working condition with
e
e
oad .arcad working jackpots except number 12 and number 18.
l
n
Dow //www
:
Steve Gronowski
http
11.
5$ Mills/Pace with 2 Column Mint Vendor—
$1,150
8008 Memory Lane
1982 Arcade Museum
© March,
The International
Chicago, Illinois 60656
312-775-4023
THE COIN SLOT-5
http://www.arcade-museum.com/

Download Page 6: PDF File | Image

Download Page 7 PDF File | Image

Future scanning projects are planned by the International Arcade Museum Library (IAML).

Pro Tip: You can flip pages on the issue easily by using the left and right arrow keys on your keyboard.