Coin Slot

Issue: 1982 June 088

Coin Slot Magazine - #088 - 1982 - June[International Arcade Museum]
flat and dull, it's probably original. Repros tend to look too
Mills 25 Sincerely,
good.
As for switched mechs, that's tougher. But does it really
matter? The operators ofyore switched mechs all the time to
keep their machines running. So ifit's a switch from the 1930s
that's the way the machine ran and it's valid as an antique. The
only real way to tell is if both the cabinet and the mech have
serial numbers, and they're different The other way to tell is
obvious. Ifa mech doesn'tfit, or doesn't connect where it should
and is therefore inoperable chances are a switch was made, and
probably recently (i.e. within the last 15 years).
If you really want to know the insides and out of your
machine you'll want Coin Slot Guide No. 41 for the Jennings
OPERATOR BELL/AUTOMATIC COUNTER VENDER
which is in the works and scheduled for printing early in the
year. It shows all the parts and maintenence data you'll need.
Farther down the line Coin Slot Guide No. 149 is in the works
for the Jennings JACK-POT/JACKPOT, but that's a year or
Fred E. Sagebaum
Dear Fred,
Hey, thanks. Those are kind words for us. And thanks for
bringing us up to snuff on the coinage of the three serials you
provided a year ago. We're always glad to know. We had that
one of the Jennings SILVER CHIEF, and you'll find the
machine in An Illustrated Price Guide to the 100 Most
Collectible Slot Machines, Volume 3. But the other two were in
the updates, missing coinage. So now the story is complete.
Very truly yours,
Editor
Dear Editor,
I just acquired a GOVERNOR by Jennings TIC TAC TOE
1 books and operation manual or any information booklets that I
two away.
could purchase pertaining to my machine. The following is
Sincerely,
information I took off the inside of the machine.
The Editor
Base Guts: #V2-7A MPI, Frame Marks: #V17-72, also
Jennings & Co. of Hershey Mfg. Co. #5-9-63-301110.
Dear Editor,
I certainly enjoy your publication. It is most informative.
Going to the color cover was a big improvement Keep up the
good work.
I currently have three machines. Last spring I sent Dick
Thanking you in advance for any help and information, I am
Very truly yours,
Jerome Cohen
Dear Jerome,
Bueschel the serial numbers, but did not include the coinage. I'm
We've got the manual for you, but it's not exactly the right
listing them below with coinage included, if you want to pass
one. The GOVERNOR is really in the Jennings SUN CHIEF
line, and our Coin Slot Guide No. 69 will cover it But Guide
them on to Dick.
SILVER CHIEF, 134,922; Mills/Buckley
No. 69 is at least a year or so awayfrom printing. Actually, the
1OC JACKPOT BELL, 356,882, originally a Mills MYSTERY;
Continued on page 10
Jennings 5 SPECIAL
OFFER!
Illustrated Price Guides
An Illustrated Price Guide to the
100 Most Collectible Slot Machines,
Volume 1, Volume 2 and Volume 3.
An Illustrated Price Guide to the
100 Most Collectible Trade Stimulators,
Volume 1 and Volume 2.
All 5 books for only
$70.00 Postage Paid
The Coin Slot Guides
SS?WSRMATI0N
AB0UT MUCH
THESE MORE"!
5 BO
AND
34 GUIDES AND MUCH,
NAME
.com
m
u
e
Any 10 Guides om:
d fr U.P.S. e-mus
$60.00 plus de
$2.00
d
a Guides
Any
nlo 20
arca
.
w
o
w
D
w $3.00 U.P.S.
$115.00
plus
: All //w 34
p
t
t
Guides
h
SEND IN THIS COUPON FOR YOUR FREE COPY
°F THE COIN SLOT REVIEW. IN IT YOU WILL FIND
ADDRESS
CITY
PHONE _
.STATE.
ZIP
Mail to:
THE COIN SLOT, P.O. Box 612, Wheatridge, CO 80034
$195.00 Postage Paid
June, 1982
© The International Arcade Museum
THE COIN SLOT-9
http://www.arcade-museum.com/
Coin Slot Magazine - #088 - 1982 - June[International Arcade Museum]
Price Guide to the 100 Most Collectible Slot Machines,
Volume 1 available at $15.95 plus postage. The history is on
E 1 1ERS Continued
pages 110 and 111.
The Editor
mechanical parts of the machine are virtually identical to the
Dear Editor,
earlier Jennings CHIEF line, so in the absence of the later
First off, please except my apology for the delay since your
guide you II find that Coin Slot Guide No. 2 for the Jennings
prompt reply. As you can see by the photos, everything has been
CHIEF will do the job for maintenance repair nicely. And it's
sraightened out Secondly, I wanted to thank you for the issue of
available right now at $6.95 plus postage.
The Coin Slot and Review. I was familiar with the magazine a
We're also interested in your machine as that 301,110 serial
number dated May 9, 1963 is the highest Jennings serial
interesting publication.
Nevertheless, everything's progressing just fine in the coin-op
number we've heard of to date.
Incidentally,
few years ago, but didn't realize it's developed into a very
if you're interested in the history of your
machine you might enjoy the latest update of An Illustrated
world in N.Y. I don't know if my comments will be of any use, but
I'll give you the rundown on each of the machines.
Bally BAFFLE
BALL - I believe mine is in average
condition. Interesting notes: the two holes for the cast BAFFLE
BALL sign on top. Also in the center of the decal: A Game of
FOR SALE
Skill, W.J.C. Vending Co. of Hillside, N.J. I've found this
company listed infrequently in Billboard of 193O's. The 5$ is
over the 1C original and was probably added about one year after
Genuine, old stock, nickel
nudger machines. Stores and
dispenses nickels, useful and
attractive. $20. post paid.
the machine's release. I've owned this machine for three years
and I must say there still is "that magic" about getting the
BAFFLE POINT and doubling the score.
Genco SKY RIDE - is always fun. Having the balls glide
down the curved rails is always a thrill. Notes: Excise tax decal
in upper right. Pedestal Tilt appropriately named — Tilter.
Sincerely,
SLOT CLOSET
Art Haber
Editors note: We asked Dick for help with this one.
5929 N. Greely
Portland, OR 97217
Dear Art,
Got your pictures and they're marvelous. As are your
TCS
comments about the machines. Yes, I'm very interested in your
feelings about the various machines and, yes, you'll see these
comments reflected in my copy describing each one.
One thing I was thrilled to see was the Genco SKY RIDE.
That's a marvelous early game, and one rarely mentioned
Mostly, I think, because it was only distributed in the east and
was never a popular Genco item. The squirrely tracks are great.
My collection? Oddball, huh. Hike "early" things. Redgrave
TCS
made non coin-op bagatelles for saloons in the 1871-1904
the opening of our
store in Baltimore's
newest and largest mall.
period. Singer made the first "feature" game with a spinning
star and a bell, circa 1893, and Redgrave bought him out. Field
was an early pinball maker, circa 1931-1933. There probably
BODZER'S*
ANTIQUE SLOT
MACHINE COMPANY
starts a "pinball surge."
Yes, I agree that the Peo is the first kicker backglass. And,
even though its main claim to fame is that it is the first
"artwork" (not geometrical) backglass. No need for photos of
White Marsh Mall
om
m.c
m:
eu
nloa w.arca STORE
w
SHOP
o
D
/ww
/
:
301-661-8804
301-256-0062
p
t
ht
fro -mus
Come
ded See de Us!
which is why I'm excited about the book as it'll give all ofit —
my games, and yours — national acceptance. I just hope it
yes, I'd like playfield photos of the Mills PEARL HARBOR,
AT
8200 Perry Hall Blvd.
(One Mile Off I-95)
aren't six guys in the country that are into this kind of stuff,
WORLD SERIES (although a good,
Yes,
The Coin Slot has come a long way.
© The International Arcade Museum
You should
probably be getting it, if only for the Russ Jensen articles on
pin balls.
Regards,
Dick Bueschel
Dear Editor,
This is just a quick note to accompany my subscription
renewal. First, I want to say I've enjoyed your magazine and
look forward to future issues!
10 —THE COIN SLOT
close playfield shot
would help me) or the old Billboard ads as I have these.
Continued on page 12
June, 1982
http://www.arcade-museum.com/

Download Page 9: PDF File | Image

Download Page 10 PDF File | Image

Future scanning projects are planned by the International Arcade Museum Library (IAML).

Pro Tip: You can flip pages on the issue easily by using the left and right arrow keys on your keyboard.