Coin Slot

Issue: 1982 June 088

Coin Slot Magazine - #088 - 1982 - June[International Arcade Museum]
Restoration & Repair
Continued from page 45
When a multi-player machine is equipped with
two or three of these units, they operate
individually in quick succession, resulting in
the most fabulously thrilling display of rapid-fire
electro-mechanical hoopla that one could ever hope to
witness.
While each manufacturer, be it Evans, Keeney, Mills,
Bally, or Universal, has approached the design of their
systems from slightly different angles, the final results
are the same — for when any true collector beholds
such a machine as it is taken through its paces, the
coins may as well have been shot through his heart, for
he will surely have to possess it.
to accelerate, thus shortening cycle time significantly.
The idea is to pull the handle sometime after the last
click but before the clock stops to get 3 turns of the
reel, pulling a little sooner or a little later until you get a
cherry on the first reel, then holding it there until the
tube is empty.
Unfortunately,
my ROL-A-TOP has
never been rebuilt and the clock doesn't repeat per
fectly. From a dead stop the first reel will spin anywhere
from 31/2 to 3% turns. I tried a restored Pace but got the
same results, only less eratic. Possibly if the Pace was
worn in it would do better. If you want to read about this
system there is some information in "Scarne's Com
plete Guide to Gambling."
Sincerely,
Richard J. Fague
Dear Mr. Fague,
Thank you for your letter detailing the theory of the
This Month's Letter
In the October article on probability and odds, I
stated "There is no method of symbol or payout
counting, special technique for pulling the handle,
custom computer programming system, bombardment
with x-rays and laser beams, or use of nuclear power
which can be used to gain an advantage over the
random spinning of those fruit-covered reels."
Many readers wrote in to say that a "rhythm system"
existed, but, unfortunately, all were unable either to
describe the system or the theory behind it, nor had
any of them actually seen the system in use or known
anyone who had used or could demonstrate such a
system.
Luckily, however, a letter shedding light on this
system has been received from fellow collector Richard
Fague. Herewith is Mr. Fague's description and my
response:
Dear Mr. Harrison,
I've been interested in the rhythm system for a long
time. Over the years I've talked to many operators, they
had heard of it but none of them knew anything about
rhythm system. From your description I have
concluded that in practice, such a system could
only be successful if used by very skillful players on
consistently exact machines. Since control can be
exercised over the first reel only, this system is effective
with single cherry payout machines exclusively, and
thus could not have become popular until after the war.
Assuming that it takes five or six pulls to establish the
rhythm, as a player would at best receive only two
coins for each one inserted, his timing would have to
be quite exact for him to be able to empty the tube
faster than he was filling it. When we add failures
caused by the players mistakes or inconsistencies in
the machine, the success rate would be even further
reduced. I think it might be less work to get an honest
job.
Sincerely,
Marc
List of Advertisers
page 8
page 11
it, or where I could get any information about it. Nor had
A & P Slots
Aardvark
Bandits
they known anyone who could rhythm a machine. Or
Bernie Berten
page 19
they didn't want to discuss it. I suspect that the rhythm
Bodzer's Antique Slot Machine Co
Casino Antiques Ltd
system is about as hard to learn as it is to count cards
page 3
page 10
Back Cover
can't be rhythmed is a Caille SUPERIOR JACKPOT. I
know this because back in the late fifties I got wind of
the system and started fooling with my Caille to see if it
worked. Well, I found out immediately that the clock
stops right after the last click so there can be no
control. I will use my ROL-A-TOP as an example to
Chicago Antique Slot Machine Co
Coin Slot Books
Evans and Frink
page 2
page 9
page 13
Tony Goodstone
Stan Harris
JamieLynn Cabinets
Jones
page 19
page 14
page 8
page 19
explain what I think is the rationale behind this system.
I put a piece of masking tape on the first reel to see how
Jukebox Junction
Miami Antique Slot Machine Co
many turns I get per cycle. I found that the first reel
Mills Novelty Co.
page 13
turns 31/2 times before it stops, if the clock is at a dead
Nevada Magazine
One Arm Bandit
page 25
page 49
and make money at Black Jack. One machine I know
page 7
.com
m
:
u
immediately after the last m
click
the number
of turns on
e
s The
r to o 21A turns.
u
f
m
the first reel is reduced
reason
for this
d
-
de instance
de the fan has to accelerate
a
oa first
change is, in l the
c
r
n
ow stop w to w a .a peak speed and then slow down
from D
a dead
/w
as the spring
tension decreases, finally coasting to a
tp:/ second
ht the
stop. In
instance the clock is spinning at
Rockin' Relix Inc
Saloon Antiquities
Slot Closet, The
page 16
page 12
page 10
Specialty Slots Corp
St. Louis Slot Machine Co
The Coin Slot
page 14
page 51
page 35
somewhere near its peak speed when the handle is
Tip Sandblasting
pulled, thereby eliminating the time needed for the fan
Unique Antique
stop when the handle is pulled. If the handle is pulled
46 — THE COIN SLOT
© The International Arcade Museum
page 5
page 16
June, 1982
http://www.arcade-museum.com/
Coin Slot Magazine - #088 - 1982 - June[International Arcade Museum]
Pappy Sez:»
Larry Lubliner
"A SHEET OF PAPER IS NEVER SO THIN
THAT THERE AREN'T TWO SIDES TO IT."
Q. Deaj Pappy,
I have a Mills HIGHTOP and it needs some
repair parts. Could you provide me with names of
people that sell these parts? Also, where can I get
informationontermslikeC.O.K, R.O.K., D.R.D.,etc.
Q. Dear Pappy,
I recently found this machine. Can you identify
it and tell me what it is worth? Also, can you tell me
how the large cogged wheel in the center oper
ates? Does it govern the number of coins that
As you may guess, I am new to this and would like
enter the jackpot?
to start collecting but really don't know where to
Collector
start. I want to repair them myself also.
Los Angeles, California
J.G.H.
Tempe, Arizona
A. DearJ.G.H.,
The best place to obtain a list of names for parts
is from The Coin Slot, and the best place to obtain
information on terms isfrom the"100 Most Collec
tible Series" by Dick Bueschel.
Now, about collecting! This can take as many
twists and turns as a Ludlow novel. Some people
begin collecting simply because they like one
particular machine. Say, for instance, a Watling
ROL-A-TOP. If they bought a nickel, they might
want a dime next, then a quarter, etc. Then a
50/250, penny gumball vender and on and on.
Perhaps they just bought a HIGHTOP for their
A. Dear Collector,
Your machine is a Jennings VICTORIA Model B,
dating from roughly 1931. Its current value would
be $1,000 - $1,200. Now, you are absolutely right
in suggesting that the large cogged wheel governs
the number of coins entering the jackpot. It can be
pre-set to the desired number of coins, 60,70, etc.
and that exact amount will be entered into the
jackpot.
basement bar. After that they wanted another,
maybe a gooseneck, then a WAR EAGLE and on
and on.
Needless to say, the ways to go about collecting
are endless, but here are some tips.
1) Buy what you like!
2) Look for machines which might be under
valued at the moment.
3) Buy machines in as good original condition
as possible.
Do not buy reproductions.
.com
m
:
u
m
e
d fro de-mus
e
d
nloa w.arca
w
o
D
w
://w
p
t
t
h
Dear Pappy,
Please tell me what you can about this Pace
BANTAM. What year is it? How many were made?
What is its value and are parts and repair informa
tion available?
AT.
Englewood, Florida
Continued on page 48
June,
© The International Arcade Museum
THE COIN SLOT-47
http://www.arcade-museum.com/

Download Page 46: PDF File | Image

Download Page 47 PDF File | Image

Future scanning projects are planned by the International Arcade Museum Library (IAML).

Pro Tip: You can flip pages on the issue easily by using the left and right arrow keys on your keyboard.