Coin Slot

Issue: 1980 July 065

Coin Slot Magazine - #065 - 1980 - July [International Arcade Museum]
Ditto for the side vender as two or three suppliers have
reproduced this component.
That red and yellow lever system on your Q. T. identifies it as
the "Convertible" model for straight Bell play or no-pay-on-
check play. This will all be detailed in the upcoming Coin Slot
Guide No. 82for the Mills Q. T. It probably won't be ready until
sometime next year as it is high up in the numbers, although
extra interest might speed it up a bit.
And when will a book on serial numbers be published? Well,
it's in the works. Volume 3 of the "100 Most Collectible Slots"
series is just about written and will include all of the serials that
have appeared in The Coin Slot, as well as twice as many more.
It'll be the complete serial number guide for years. Expect
publication early next year.
Editor
Dear Coin Slot:
Just a very short note to let you know that I feel the COIN
SLOT has improved tremendously since Rosanna Harris
became Editor. I wanted to pass this comment to you. First of
all, the printing is much better; and the photos look very good.
Also, you can really see that you have taken a creative approach
to the publication. Above all and something the readers should
be able to see very easily, COIN SLOT concentrates strictly on
issues that pertain to slots, pinballs, and other old machines. It is
enjoyable to receive it and review the articles. I sincerely hope
other readers share my views.
Cordially yours,
Dale Bassett
Dear Editor:
I am looking for the following parts for a Pace Comet—any
info would be appreciated. 1) The award card holder-
decorative piece across the front of machine as per picture. 2)
Escalator—complete, 3) Jack Pot strip arm. This machine is a
nickel and has a 3-5 payout. Waiting to hear from you.
Thanks—
Dear Ralph:
You've got a nifty game in the Jeu De Course, or better known
in its day as "The French Race Game". While the machine was
originally made in the early 1890's, yours looks later. They made
them the same wayfor overfifty years so it's hard to tell the age
of these clever racing machines. The maker was M. Jost &
Company in Paris, France. The French name for the maker
M.J. & Cie. The Jostfirm was a maker ofgambling goods, and
many of the "imported" roulette tables and other French
gambling equipment that ran in the western states in the mining
days was made by Jost. In fact, Jost was to France and most of
the world what Mason, Kernan, H.C. Evans and others were to
the American market.
Editor
Continued on page 8
SLOT MACHINE COVERS
Miles D. Miller
38967 Palm Tree Way
Palmdale, CA 93550
Dear Miles:
Thanksfor the letter, Miles, and that's certainly the right way
to use COIN SLOT Guide No. 4 for the post-war Pace
DEL UXE COMET. We don't have parts here, but on the hunch
that COIN SLOT readers can help we're reproducing the
drawings you sent. Here's hoping some readers out there can
come up with the parts that you need.
Editor
Protect your valuable investment with ourTailor Made Slot
Machine Covers. Designed especially for the serious
collector. Made of durable cotton & dacron in attractive
•Tavern Tan" color, with logo of each manufacturer on the
front in 2 colors! Keeps dust, moisture off, yet lets the
material breathe. Each cover is built from precision master
patterns which we have for almost every machine.
Note—these covers are tailored to fit exactly and even have
com
.
m
:
u
from -muse
d
e
e
d
Dear Editor: nloa
rcad
a
.
w
o machine. w I w
1 have D
this
if you or any of your staff
w am wondering
/
/
:
would have t any
information,
besides
what I have, about it. I
p
h t
a small "Key Compartment" on the back so that your key is
always handy, yet not broken off in the lock. They are
compact, lightweight & washable and will not scratch even
the most delicate finish. FREE BROCHURE.
PREPAID UPS - $9.50 ea., $8.00 ea. doz., $6.50 ea. for 25,
$5.50 ea. for 100. Deduct $1.00 if logo not wanted. Just send
make & model of your machine for perfect fit.
subscribe to your fine magazine and really appreciate it. Thank
Phone orders shipped on your Visa or Mastercharge
you.
BOB ZWICKER, P.O. 2739, Youngstown, OH 44507, 800-
Ralph Bentley
321-9260 Toll Free except from Ohio (216) 745-9733.
Bloomington, IL
© JULY,
The International
Arcade Museum
1980
THE COIN SLOT — 7
http://www.arcade-museum.com/
Coin Slot Magazine - #065 - 1980 - July [International Arcade Museum]
Letters to the Editor continued
Dear Joe:
You're running a bit previous to the rate the Coin Slot Guides
are coming out. Yes, there is a Coin Slot Guideprojectedfor the
Could you help me or refer me to someone? I have a Rockola
Watling Twin Jackpot and all of the other "Flat Top" machines
in the "Blue Seal" line, but it's Guide No. 51. It's in the works,
and all ofthe material has been assembled, but we're running the
Gumball Vender 5 reel machine. I wrote to Rockola, to no avail.
printer ragged. Best guess is that Guide No. 51 will be out by the
They couldn't place a time of manufacturing or a value on this
end of the year, but it'll be worth waiting for. You seem to be
piece. It is a one cent vend, with 5 hold buttons front of each reel,
2 reel spins per coin. I found casting numbers as follows: back
right on the serial number of T-43,322 as that is right in the
middle of the "Blue Seal" run of serials. Best regards!
door—HD 205; Sides HD 209-HD 213, Front HD 214. I am
Editor
Dear Editor:
enclosing photograph of unit. Maybe this will shed some light. I
would appreciate any info you could supply S. A.S.E. enclosed.
Sincerely,
Should New York be included on the attached? I am now
Charles E. Spital, Jr.
1
I
1
Dear Editor:
1
1
|
owner of a 1934 Mills War Eagle, and am interested in where I
could secure replacement parts if needed. Also, any recommen
dations on any servicemen who could service my machine in my
area (Long Island, NY)?
Joe Rottmann
SLOT MACHINES-
Would allow person* to own
antique slot machines. Ma
chines that were either man
ufactured before 1941 or are
not used for gambling would
be covered.
Dear Joe:
Thanksfor the clipping, Joe, and offhand we don't know who
has popped up in your area to service machines. But we'll run
your letter and let's see if you get any offers of help.
Editor
Dear Charles:
The machine is the Rockola Hold and Draw ofJanuary 1935,
a big hit at the 1935 coin machine convention and the most
Dear COIN SLOT:
It's not
I recently purchased your book, "The One Hundred Most
surprising that the Rockola people didn't know what it is; 1935 is
Collectable Slot Machines" from American International
Galleries in California, and wanted to tell you how much I
enjoyed it. It has greatly increased my knowledge of antique
slots, a subject which has become fascinating to me during the
past few years. Your mention of the Jennings Silver Chief in the
popular trade stimulator ever made by Rockola.
a long time ago. The thing that made identification of your
machine so difficult is the fact that the marquee with the
machine name is missing. Maybe this will help. Here's the 1935
advertising piece that shows the marquee. Maybe somebody has
one, or you can reproduce what you need from this copy.
Thanks for the stamped envelope.
Editor
information on the Silver Moon.Chief was beneficial. I have had
a Silver.Chief for nine years and was never able to determine its
vintage or any history on it before. The machine shows serial
number 184922, but it appears that the eight was originally a
three, thus it probably was #134922.
I have a few questions which I hope you might take a minute
to give me an opinion on. Did Mills every revamp their own
machines? I have a 10c Cherry Frontier Black Cherry which
appears to be Mills in every respect. Reel strips are Mills and it
has the stainless steel award panel, Oke Mills.Chrome. On the
inside of the case, which is aluminum, you can make out where
the diamond studs would appear, as on Mills Chrome. Would
Mills have used the same castings for each? The serial # on the
.com
m
:
u
m
Dear Editor:
use
m
d fro Twin
-
e
e
d
I recently procurred
a
Watling
Jackpot
Slot machine. I
d
loa .arca Slot
n
was going to buy
one of the.Coin
Guides but I didn't see my
w
Do /w The
ww
machine listed in / it.
serial # is (I think) T53322 and the Pat #
:
tp you can do me some good in regards to this
is 1763841. h I t hope
matter. Thank you.
Joseph M. Babich
Joliet, IL 60435
© 8 The
International
— THE
COIN Arcade
SLOT Museum
base is also an older #356882, and the base piece is also made up
of two separate pieces.
I also just acquired a 25c Mills Black Cherry, complete and
original in every respect. The machine still has the Mills emblem
and black paint on the sides and base. The paint has peeled in
places and the red trim paint on the front is faded. Regarding
value, is this machine worth more with original paint rather than
completely
redone?
Regarding my
Silver Chief,
would
it
compare in value to the One Star, or Four Star? The machine is
in fair or average condition and a 5c denomination.
I would greatly appreciate any information you might give
Continued on page 10
http://www.arcade-museum.com/
JULY, 1980

Download Page 7: PDF File | Image

Download Page 8 PDF File | Image

Future scanning projects are planned by the International Arcade Museum Library (IAML).

Pro Tip: You can flip pages on the issue easily by using the left and right arrow keys on your keyboard.