C.O.C.A. Times

Issue: 2009-November - Vol 12 Num 3

Note the large advertising frame attached to the top of the machine in Fig 1. This was used to sell advertis-
ing space to various businesses thereby allowing the vending company and the store keeper to sell the stamps at
face value as a service to the customers. This machine might have sold 5¢ in stamps for a nickel. The company
could also sell advertising space on each "pocket". Naturally without the advertising income the operator would
sell stamps at the currently vended market value in 1909 and later.
Since there is currently no known
sample of a "pocket"(a difficult search),
I have had to take measurements of the
working mechanism and operational
systems of the machine. When a nickel
is inserted and the hand crank is turned
it will advance a main cam. On this cam
there are 4 tapered posts, centered on the
cam, spaced approximately 36 millime-
ters (mm) apart. Each post is 4 mm high,
5 mm wide at the base and 2 mm at the
top, (Figure 7).
Figure 7
The sidewise strip has to have a center perforated hole separating each "pocket" which must be at least 5 mm.
The length of each "pocket" is 36 mm and 26 mm high. This size "pocket" is enough to place either a regular
or commemorative issued stamp. When the stamps were placed in each "pocket", a single flap was then folded
over the edges to contain the items in the "pocket" , (Figures 3 and 4). The strip had to be rolled onto a bobbin
and placed in the machine. It is unknown what number of "pockets" would fit in the machine.
After the strip was advanced one "pocket" length, a knife would be released to cut the strip and dispense
the "pocket".
I believe it will be very hard to find the "pocket" used for this machine even it has copy printed on it.
If anyone else has further information on this device, please let me know.
Reference:
1. George Howard, The Stamp Machines and Coiled Stamps, 1943, H.L.Linquist Publications, New York, NY
Ila DIGGER PARTS AND SUPPLIES STOREem!l!)
PARTS FOR DECO ERA DIGGERS (Pre 1951)
PRIZE MERCHANDISE •
srici~sE -

PARTS FOR CARNIVAL DIGGERS (Non-electric)
DVDs, BOOKS, INSTRUCTIONS, SIGNAGE • MACHINES FOR SALE
VINTAGE AMUSEMENTS WEBSITE - H~S~~~v
GO TO: www.jamesroller.com/Vlntage OR: GOOGLE \\Vintage Amusements"
30
1
I'm Always Looking To Buy Coin-Operated Machines, Magazines, and Catalogs:
11 .. ~
.,.
. L_ J W
.-__,__ :..:.r._~
,,,,
l
h HE CLUCK INC CLER,{ ·• • , •
I
Cast Iron Mutoscopes
Rare or Iron Vendin
French, German, and English
Gamblin , Arcade & Vendin
> .. ·: 10
I
I
Oddities, Obscure,
Rare and Uni ue
3 Old Real Photos - Where Are The Machines Now?
"The Herculean" Football
Ancestor To A Mills Machine?
"The Bar"
Thinking about selling ONE PIECE or an ENTIRE COLLECTION?
Generous Finders Fees Paid for Successful Leads (Thank you again - You know who you are!)
Coin-Op machines from the 1880s through the 1940's are
particularly interesting. Wanted: American and European
Arcade, Slots, Vending, and Working Models
GREG McLEMORE
( 626) 794 - 5000 xl 10
mclemore@webmagic.com
Do you collect similar coin-ops? Look for me at the
Chicagoland show or call me and let's trade stories.
First 10 years of Coin Slot Magazine - On li ne - Free
ht ://www.arcade-museum.com/lib ra /search/?catid=7

Download Page 30: PDF File | Image

Download Page 31 PDF File | Image

Future scanning projects are planned by the International Arcade Museum Library (IAML).

Pro Tip: You can flip pages on the issue easily by using the left and right arrow keys on your keyboard.